First off - thanks for all the encouragement and suggestions as to why my GPZ was having problems starting.
First stop was eBay - searched for GPZ parts and found a gentleman selling loads of parts. Ordered a starter motor for $30. Installed it today and bingo! it's fine.
Learnt heaps about my bike at the same time - disconnecting the battery (under a fuse / junction box), removing the starter motor - tougher than I expected, installing the starter motor required removing the engine side cover, lining up the small cog to go onto the new starter and reassembling everything. Check everything is installed properly then hit the start button - excellent!
Couple of notes:
The left hand side bolt hole in the lower fairing is cracked and has evidence of repair on the inside - not sure of the best way to fix this.
After putting it back together I noticed the front left indicator seemed to be drooping - went to adjust it and it came off in my hand. Seems it was being held on by electrical tape. Have not looked more closely yet as to how to repair (or if its worth repairing).
Anyway, thanks again and I hope to get out on a group ride / coffee meeting soon.
Have a great weekend!
Cheers,
Wayne
