recomend 47 tooth rear sprocket GPX250

All GPx and GPz Models

recomend 47 tooth rear sprocket GPX250

Postby GlennB » Sun May 21, 2006 6:55 pm

HI all, I just put on a 47 tooth rear sprocket on my GPX250 and what an improvement on exeleration. Also easier to wheelie too :D It revs a touch higher on the hwy but worth it. Also dont have to rev the guts out of the bike as much if you need to launch your self off at the lights.
My front still stock with the 14 tooth.
Ride safe
Glenn
GlennB
KSRC Member
KSRC Member
 
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

Postby mike-s » Mon May 22, 2006 1:50 pm

how many teeth did you go up on the rear?
Image
If it hurts, you aren't doing it right.
User avatar
mike-s
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 6142
Joined: Sat Aug 07, 2004 5:43 am
Location: Arncliffe, Sydney
Bike: Suzuki
State: New South Wales

Postby Duane » Mon May 22, 2006 2:02 pm

mike-s wrote:how many teeth did you go up on the rear?


Ah but you see mike-s it's how many teeth he'll go down by, when he stacks it wheelying and lands jaw first !!!
www.bromancer.com.au
User avatar
Duane
KSRC Addict
KSRC Addict
 
Posts: 3011
Joined: Mon Jul 26, 2004 9:15 am
Location: VIC
Bike: Z1000
State: Victoria

Postby GlennB » Tue May 23, 2006 7:04 pm

Duane wrote:
mike-s wrote:how many teeth did you go up on the rear?


Ah but you see mike-s it's how many teeth he'll go down by, when he stacks it wheelying and lands jaw first !!!


LOL 8)

mike s , I went up 2 teeth.
GlennB
KSRC Member
KSRC Member
 
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

Postby photomike666 » Tue May 23, 2006 7:23 pm

It's generally easier (and cheaper on chains) to go down 1 tooth on the front. It is also a slightly more exagerated lower ratio (turns of front sprocket: 1 turn of rear)

14-45 = 3.214:1 Standard
14-47 = 3.357:1 Up at back (requires longer chain to standard)
13-45 = 3.462:1 Down at front (requires shorter chain)
--------------------------------------------------------------------------------------------------------------
07 ZX10R since new, tracky TBA, KX450F, 87 CR250 restoration, GT MTB - I've got serious thrill issues, dude
User avatar
photomike666
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 5956
Joined: Sat Jan 15, 2005 12:01 am
Location: Melbourne
Bike: ZX10R
State: Victoria

Postby GlennB » Tue May 23, 2006 7:52 pm

Thought about lowering the front spocket but Didnt want to put the speedo out any further and was going to rev 2 high at 100ks and Ive hear that changing the rear gives that little bit more go than the front too for some reason.
I found that changing the rear up 2 just gave me that happy medium.
I also didnt have 2 lengthen my chain at all, In fact it only brought the wheel in 1 1/2 notches on the trailing arm and still got heaps of room.
GlennB
KSRC Member
KSRC Member
 
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

Postby wazza1234 » Tue May 23, 2006 9:12 pm

how how many rpm is it doing at 100ks now? What kind of acceleration increase did you get?
User avatar
wazza1234
KSRC Member
KSRC Member
 
Posts: 243
Joined: Sun Dec 11, 2005 3:56 pm
Location: Toowoomba, QLD
Bike: ZZR250
State: Queensland

Postby GlennB » Wed May 24, 2006 5:22 pm

I think its about 500rpm more. It is noticably quicker and can lift the wheel very easy now. you do loose a little power up high though about 140ks onwards but I wanted more power of at the light and quicker over taking between 80-120 so its done me fine. You will find that the improvement is best between 9-14rpm. I find it just zips through second gear now.
Unfortunatly its not 600 quick though :( 6 more months to go(or lesser if if Im naughty :twisted: )
GlennB
KSRC Member
KSRC Member
 
Posts: 152
Joined: Wed Nov 23, 2005 6:41 pm
Location: Geelong

Postby ozx6r » Wed May 24, 2006 6:37 pm

yeah - i went up 5 on rear about 18 months ago and it is great up twisties but crap on highway bout 5500 i think at 100kmh and it helps with the wheelies :) ohh and the top speed is now only about 215-220
97 - zx6r
05 - zx10r
User avatar
ozx6r
Team Crim
 
Posts: 1194
Joined: Tue Jan 18, 2005 7:29 pm
Location: Brisbane
Bike: ZX6R
State: Queensland

Postby mrmina » Thu May 25, 2006 5:48 pm

is this post a joke or what.

u put a big rear sprocket on a 250 :!:

:lol: :lol: :lol: :lol: :lol: :lol:
[url]www.rmsmg.com.au
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria


Return to GPX & GPZ Discussion

Who is online

Users browsing this forum: No registered users and 3 guests