05 zxr636 how can i remover catalic converter from exhaust

[mulisha770]

i want remove catilic converter with out replacing the whole exhaust can it be done by just cutting it out????? please help

[Rossi]

Why ??

[gizmo]

Why bother when it's Illegal! Just going to cause you all sorts of legal problems if you get caught!

Now that the right thing to do is out of the way, on a car I have heard of using a big hammer & a long drift/piece of steel/timber etc.
Does a slip on exhaust remove the cat convertor?

[John H]

Why ??

Because you might gain 0.5hp without it? I dunno. I didn't realise it even had one!

[Gosling1]

Why bother when it's Illegal! Just going to cause you all sorts of legal problems if you get caught!

Now that the right thing to do is out of the way, on a car I have heard of using a big hammer & a long drift/piece of steel/timber etc.
Does a slip on exhaust remove the cat convertor?

The slip-on on my 12 did not replace the cat, afaik most 'cats' are further down the collector, when I took the stock can of the 12 you could see the honeycomb of the collector.....

and Yes, according to some people who have done it, you take to the cat with a long screwdriver or long steel drift, belt the fuck out of it while trying to 'prise' it off the sides of the exhaust.......then start the bike, rev it heaps, this will blow out all the frag.......

Personally, I think 'belting' anything inside your exhaust will cause problems with the exhaust bolts and/or exhaust gaskets......

Leave it in there mate, and just replace the whole system with an Akra or Arata, Yoshi, whatever, that has NO cat convertor.

[krusty]

rather than remove it just run some leaded fuel through it to poision the catalyst . I have some super in a can I got before they removed the lead from it when that LRP stuff came in.

[ZX10R King]

rather than remove it just run some leaded fuel through it to poision the catalyst . I have some super in a can I got before they removed the lead from it when that LRP stuff came in.

As they did that quite some time ago, I would be a bit suss of that fuel as fuel goes OFF after a quite short period of time

[Glen]

I think the Cat is in the can on the ZX10's ( I could be wrong though, heaven knows it's happened before) so a slip on gets rid of it.

Does it really make any difference though?

[MickLC]

I think the Cat is in the can on the ZX10's...

Yep, and it clicks and ticks like buggery whenever it is warming up or cooling down. Things are much quieter with a slip-on

[Glen]

I think the Cat is in the can on the ZX10's...

Yep, and it clicks and ticks like buggery whenever it is warming up or cooling down. Things are much quieter with a slip-on

Yeah and the bloody thing used to get as hot as a bastard.
Mr Akrapovic fixed that one

[Gosling1]

....Yeah and the bloody thing used to get as hot as a bastard....Mr Akrapovic fixed that one

I have noticed that on the 12, it get so f'n hot..... plus its restrictive....god knows I struggle with the lack of meaningful HP on that bike.......

[Barrabob]

Thers a how to on a american board it involves taking off your exhaust hacking it with a angle gringer to acsess the cat converter removing said catconverter and welding the exhaust back together.

Probably cheaper than a full akra system but i dont know if it would be as satisfying, i never recomend hacking anything when theres a better way.

[gizmo]

rather than remove it just run some leaded fuel through it to poision the catalyst . I have some super in a can I got before they removed the lead from it when that LRP stuff came in.

I don't think you can do that as it clogs the cat up & the exhaust won't breathe at all!

[SocialSecurity]

AFAIK, in NZ you can pull cats of anything and still be legal