Page 1 of 1
ZXR250A Fork seal replacement
Posted: Tue Nov 01, 2011 3:19 pm
by cwaterhouse
Hi guys, getting ready to change the fork seals on my bike (A2 model 1990). Can anyone point me in the direction of a manual, or just the suspension section with oil height level? All I've managed to turn up by searching are a whole lot of dead links, and the manual for the C version.
Any help greatly appreciated!
Re: ZXR250A Fork seal replacement
Posted: Tue Nov 01, 2011 4:16 pm
by damo1
mate i just typed in free manuals for your bike and got heaps of hits
try these
http://www.kiwibiker.co.nz/forums/archi ... 11478.html
Re: ZXR250A Fork seal replacement
Posted: Wed Nov 02, 2011 7:54 am
by cwaterhouse
Hey Damo,
None of those links lead to a downloadable ZXR250A manual I'm afraid.
The most active one, ZXR250.com has a dead link from the forum section. If I can get a copy I will happily host it for others to use.
Cheers,
Colin.
Re: ZXR250A Fork seal replacement
Posted: Fri Nov 04, 2011 7:11 am
by cwaterhouse
Looked it up at the dealer.
ZXR250A1 - 397mL or 109mm +- 2mm
ZXR250A2 - 380mL or 137mm +- 2mm
Re: ZXR250A Fork seal replacement
Posted: Sat Nov 05, 2011 12:44 pm
by Deanoseadog
My manual has slightly different numbers to that. It doesn't say if it's for an A or a C or whatever though. So you may have more accurate info than me.
mine says approx 365ml or 85mm +/-2mm
or 430ml when completely dry.
Sorry if that confuses more than helps. I ended up with about 460ml in mine. And that seemed to work a bit better. Not sure which ones mine are, but they have no compression adjustment.
Re: ZXR250A Fork seal replacement
Posted: Mon Nov 07, 2011 9:04 am
by cwaterhouse
You must have the C model manual (from japi.com.ar). You can tell the a and c apart apart by looking at the swingarm. A model don't have the compression damping force adjustment at the bottom of the fork AFAIK.