Kawasaki Sportsbike Riders Club - Australia - Online Forum

These are the same as the one I am running and work the same as the dynojet one.
They allow you to upshift without backing off the throttle.
They are called PK power and work with a power commander 3 and 5 (PCIII / PCV) -also yamaha race ecu and rapid bike ecu...
Cost is $130 shipped - with no rods, I found it better to set it up and grab a rod from Pete (Kaneg) and trim it to suit with a bit of threaded rod if necessary (I have plenty of that if you need it)..!
I can get them to supply the rod as per the pic for $10 extra, but Petes are a better option.

http://www.pk-power.com/quickshifter.php

Misleading title... "want" is not the same as "for sale"!!

they dont hook up to dynojet pc111 do they?

budgienutz wrote:they dont hook up to dynojet pc111 do they?

Read his post,
It says "power commander 3"
What does pc111 stand for?

P4nza wrote:Misleading title... "want" is not the same as "for sale"!!

I don't know about you, but most material items I want cost money.

Oh and they don't work on Ninja 250's, so move on..

Im keen but do i still need an Ignition module to fit my PCV?

These plug into a PCV (power commander 5) and a PCIII (power commander 3), you then just run the kill shif program - which I have, and set up the RPM and the kill time and your off.
All I need to know is, if your up shift is a push or a pull on the shift rod... (my 05 is a push - in race pattern it would be a pull)

Im running Gp shift pattern.....As you leave only 30min away I may need to bring it over...

Wattie wrote:

budgienutz wrote:they dont hook up to dynojet pc111 do they?

Read his post,
It says "power commander 3"
What does pc111 stand for?

HAhahaha sorry i didnt read it properly,it will fit, sweet as.
Ill talk to the minister of war and finance and see if she will let me buy one...wish me luck!

Looks interesting... but... why would i need one?

Supafrog wrote:Looks interesting... but... why would i need one?

If you don't know why, you don't need one..

MadKaw™ wrote:

Supafrog wrote:Looks interesting... but... why would i need one?

If you don't know why, you don't need one..

I dont NEED one yet

MadKaw™ wrote:

Supafrog wrote:Looks interesting... but... why would i need one?

If you don't know why, you don't need one..

Yay! You just saved me money!! Thank you!

the quick shifter on a PC111 has to have the ignihon module to make it work!!!!!!!!!!!!!!!

MAXUMIS wrote:the quick shifter on a PC111 has to have the ignihon module to make it work!!!!!!!!!!!!!!!

Are you 100% sure and have you ever installed the brand Madkaw is offering???