clutch springs
Posted: Sun Jan 23, 2011 9:07 pm
Can someone please give me the clutch spring torque settings for Z900,
Thanx in advance,
Thanx in advance,
Kawasaki Sportsbike Riders Club - Australia - Online Forum
Australian Kawasaki Sportsbike Riders Discussion Forum - All Welcome, free and easy to join, just click "register" below - www.ksrc-au.com
https://www.ksrc-au.com/phpBB3/
clutch springs
Page 1 of 1
Re: clutch springs
Posted: Mon Jan 24, 2011 6:55 am
I will have a look in my manual tonight and let you know
Re: clutch springs
Posted: Mon Jan 24, 2011 9:08 am
Thanx,cheers.
Re: clutch springs
Posted: Mon Jan 24, 2011 6:43 pm
Ok as i suspected just do the clutch springs up tight butcross tighten presure plate spring bolts gradually and evenly.
They only offer torque setting for clutch hub hub nut 100 ft lb chain drive 90 ft lb shaft.Make sure the push rod is grased and pushes smoothly.also make sure you soak the friction plates before instilation.
They only offer torque setting for clutch hub hub nut 100 ft lb chain drive 90 ft lb shaft.Make sure the push rod is grased and pushes smoothly.also make sure you soak the friction plates before instilation.
Re: clutch springs
Posted: Tue Jan 25, 2011 5:56 am
Thankyou Sir,appreciate your time. 