Page 1 of 5
Various items and bling for Kwakas
Posted: Thu Apr 05, 2007 10:06 pm
by Ian_zx6r
Here are some items i have for Kwakas..
Tank mounted camera bracket.
Mount your video camera straight onto your tank and record your ride.
Fits all zx6r, zx9r, zzr1200, and probably lot's of other models.
If interested post a message, or send an email to
sacredblue73@hotmail.com
$80 anodised.
Comes with all bolts.
Bar ends
Posted: Thu Apr 05, 2007 10:09 pm
by Ian_zx6r
Replacement bar ends. Made from grade 6061 aluminium. Engraved with the "K" logo and highly polished. Can be anodised gold or black.
Comes with replacement M8 bolts.
$20. Natural aluminium
$27.50 Anodised...
Fits all models with an M8 bar end.
Oil plugs
Posted: Thu Apr 05, 2007 10:12 pm
by Ian_zx6r
Various replacement oil plugs. Made from grade 6061 aluminium and highly polished. Uses same o-ring as origional. Comes with a replacement o-ring.
$20
Headstem plugs
Posted: Thu Apr 05, 2007 10:14 pm
by Ian_zx6r
Made from grade 6061 aluminium and engraved with the "K" logo. Can be anodised gold or black.
Comes with o-ring fitted. Simply pushes into the hole in the headstem to cover the hole and nut.
Suits all zx6r, zx9r, zx10r, zx14r.... should suit other models, i haven't had a chance to measure them up yet.
$12 Natural aluminium
$17 Anodised.
Fairing caps
Posted: Thu Apr 05, 2007 10:16 pm
by Ian_zx6r
Replacement fairing caps. Made from grage 6061 aluminium. Can be anodised gold or black.
Comes in set of 6.
$15
Fits zx6r up to 05 model and zx9's...
Race stand bobbins
Posted: Thu Apr 05, 2007 10:19 pm
by Ian_zx6r
Made from grade 6061 aluminium. Can be anodised gold or black. comes with M10 fine bolt. Larger diameters for a better location onto the racestand.
$15
Posted: Thu Apr 05, 2007 10:31 pm
by Nanna10r
You do this stuff yourself champ ?, Looks pretty cool. I'll have to line up for some barends in the near future.
Posted: Thu Apr 05, 2007 11:25 pm
by deafwish
Hi Ian,
Will the camera mount fit my 2004 Z1000?
I'm keen if so!
Where are you located?
Cheers
Daz.
dgolding@tsn.cc
Posted: Fri Apr 06, 2007 12:13 pm
by Neka79
hey mate..do u make up polished clamp cover with the z1000 logo for the zeddy?? only found 1 UK site who do em and they wont return my emails...
Posted: Fri Apr 06, 2007 12:26 pm
by deafwish
Neka79 wrote:polished clamp cover with the z1000 logo for the zeddy...
Polished stuff was cool in the 90's...........
Stick with the stock black one IMO!
Posted: Fri Apr 06, 2007 12:56 pm
by Neka79
deafwish wrote:Neka79 wrote:polished clamp cover with the z1000 logo for the zeddy...
Polished stuff was cool in the 90's...........
Stick with the stock black one IMO!
nah..need a coupla polished bits to match the chain guard....
Posted: Sun Apr 08, 2007 1:16 pm
by Ian_zx6r
Pontikat wrote:You do this stuff yourself champ ?, Looks pretty cool. I'll have to line up for some barends in the near future.
Yes i make all these items myself.
I have items for Suzuki's Yamaha's Honda's and Triumph's also.
Posted: Sun Apr 08, 2007 1:17 pm
by Ian_zx6r
deafwish wrote:Hi Ian,
Will the camera mount fit my 2004 Z1000?
I'm keen if so!
Where are you located?
Cheers
Daz.
dgolding@tsn.cc
If the tank mount is the same as many other Kwakas it will fit, we just have to try it.
I am in Dandenong North.
Posted: Sun Apr 08, 2007 1:18 pm
by Ian_zx6r
Neka79 wrote:hey mate..do u make up polished clamp cover with the z1000 logo for the zeddy?? only found 1 UK site who do em and they wont return my emails...
Um, send me a photo of what you want and i'll have a look at it.
send to
sacredblue73@hotmail.com
Cheers
Ian
Posted: Sun Apr 08, 2007 1:21 pm
by Ian_zx6r
Spiked bar ends. Made from grade 6061 aluminium and highly polished. Can be anodised gold or black
Bolts straight into Kawkas with an M8 thread.
$30 per set polished aluminium
$37.50 Anodised.