Page 1 of 2
Need tools and help!!!!!! - Mt Waverley Vic
Posted: Wed Jan 24, 2007 9:02 pm
by deafwish
I'm attempting to change my front sprocket and only have up to a 26mm socket!
I need a big ass breaker bar/ water pipe to break the torque and a 27mm deep socket.
Anyone around Mt Waverley care to help me change it on Friday?
Pleeeeeeeeeease?!
Cheers.
Daz.
Posted: Wed Jan 24, 2007 9:11 pm
by The_Brick
If you cant get anyone come here Moorabbin and i will hit with a rattle gun
should fix it
Posted: Wed Jan 24, 2007 9:14 pm
by deafwish
The_Brick wrote:If you cant get anyone come here Moorabbin and i will hit with a rattle gun
should fix it
Thank you the brick!
I'll see how I go.....
Is it at your shop or home?
I will need to swap sprockets and do a wheel alignment whilst i'm there.....?
Posted: Wed Jan 24, 2007 9:16 pm
by The_Brick
At home
but should have all you need i think
Posted: Wed Jan 24, 2007 9:21 pm
by deafwish
I'll let you know if I can't find someone closer......
Thankyou very much for the offer!
Posted: Fri Jan 26, 2007 11:59 am
by deafwish
The_Brick wrote:If you cant get anyone come here Moorabbin and i will hit with a rattle gun
should fix it
Hi mate!
I tried using a mates 250 foot pound torque rattle gun and it still won't budge!
We even used a massive breaker bar, unsuccessfully!
Is your rattle gun torquier than 250?
If so, I'd love to come by and give it a crack!
Cheers!
Daz.
0414 305 117
Posted: Fri Jan 26, 2007 12:15 pm
by The_Brick
No sorry no bigger
And mate garage is closed at the moment
havent even got abreaker bar long enough here for that pressure
Posted: Fri Jan 26, 2007 12:24 pm
by deafwish
No prob's. I appreciate the offer.
Might your mates garage happen to be open tomorrow?
Posted: Fri Jan 26, 2007 1:01 pm
by Rossi
This may sound like a daft question BUT
You did flatten the lock washer down first ?????
Posted: Fri Jan 26, 2007 1:43 pm
by Lainie
I have a rattle gun etc and u are more than welcome to use my garage and tools if you need. I am in Hampton Park
Posted: Fri Jan 26, 2007 6:10 pm
by Felix
You may need to give it a sharp whack with a drift...
Posted: Sat Jan 27, 2007 10:22 am
by deafwish
Lainie wrote:I have a rattle gun etc and u are more than welcome to use my garage and tools if you need. I am in Hampton Park
Hi Lainie,
Thanks for the offer!
Is your rattlegun torquier than 250 foot pound?
The washer had been flattened.
I had hit it numerous times with a steel block, too!
Bastard thing!!!!!
Posted: Sat Jan 27, 2007 10:43 am
by Lainie
Is your rattlegun torquier than 250 foot pound?
Yeap tis 350
PM has been sent, I am off bike shopping this afternoon but have sent you mobile number if u need to use garage while we are out kids can unlock it for you
Posted: Sat Jan 27, 2007 11:22 am
by deafwish
PM replied, thanks Lainie!
Posted: Sat Jan 27, 2007 11:23 am
by Lainie
No problems at all