Mini UM is go!!

[Six Addict]

hooray for AUSfr... it appears to not all be here... brackets required for completion not sent (H bracket, and bracket to mount M/C to the bars) and i definitely think they gave me a bum steer on the brake lines... the ZX6R runs a Y system and i will definitely need a ling to go from the M/C to the split point

but here are the pics... the top yoke looks very spiffy







so i will fire off an email in the morning to see what the go is... im happy its here but its disappointing that after all this time, i havnt go everything i need... i ordered it over the phone to try an make sure i got everything i needed...

[hoffy]

no wonder your slow slow, your posting from a mac

and pay your phone bills !!

[Wattie]

you can run whatever line combo you like mate, i long line to the right then the piggyback over to the left, or 2 long lines all the way down. you just need different banjo bolts and washers.

[MrWasabi]

Hey does that mean the you don't need your standard bars any more? More importantly the right one?

[Six Addict]

you can run whatever line combo you like mate, i long line to the right then the piggyback over to the left, or 2 long lines all the way down. you just need different banjo bolts and washers.

yeah i know i can, they just said i wouldnt need to, and i was trying to keep costs down. but i think i will get a set of extended lines from them when i email them tomorrow.

[Saki]

no wonder your slow slow, your posting from a mac

and pay your phone bills !!

EY, Dont bring the mac into this

[Nelso]

motocross bars... and new top yoke

I was taking the piss about taking pics of the box because of the wording in your post and the ape hanger comment was in relation to how bad you will be (what you will need) when you're Glen's age.

Young whipper snappers like you should be making their bikes as uncomfortable as possible with fully sick clip-ons and rear sets, not doing smart mods like fitting comfort kits.

Are the extended lines braided?

[Damon Z1000]

WTF this is taking longer than my Z1000 and the engine cases

[6maniac]

Keep up the good work, young Owen. It will make an excellent old fart tracky with the mod's !!

[hoffy]

dude, the brakes will work, you dont understand, you replace the whole system, and it may be a diff set up to your current but that dont matter ..

[Phil]

dude, the brakes will work, you dont understand, you replace the whole system, and it may be a diff set up to your current but that dont matter ..

cause individual lines from the m/c to the each caliper is much better

[Six Addict]

ok so the missing parts issue has been cleared up...

turns out the kit for the 00-01 ZX600J is not the kit i need... i need the (as they label it) the 01-02 ZX636A kit...

[Phil]

ok so the missing parts issue has been cleared up...

turns out the kit for the 00-01 ZX600J is not the kit i need... i need the (as they label it) the 01-02 ZX636A kit...

Is this going to result in a longer wait?

[Glen]

Got it sorted yet? Waiting to see the photo's

[Six Addict]

yes it is