Chains and Sprockets

mick_dundee · Post by **mick_dundee** » Tue Dec 11, 2007 8:09 pm

Neka79 wrote:
Gosling1 wrote:
Neka79 wrote:...no1 will want u on ur knees for them mate...
yeh, like you'd knock him back if he took his teeth out !

he has teeth??

Still a couple left last I looked ya carrntsss

BikerBoy · Post by **BikerBoy** » Wed Dec 12, 2007 12:15 pm

Cooper 6R wrote:Hey there

Go the vortex chain and sprocket kit. i bought the same one through the same shop. great people. I had a 15 tooth front 40 tooth back and now 14 front 42 back and loving it. now she gets up first gear under power(power wheelie) and im playing with it all the way through 2nd. im going to try sitting right back and popping it in third i recon it will come up. still getting useto the differance in power although.

I rang the shop for a price on installing it, they said $70 an hour, I said @*#@%$ $70 #@$% dollars. then i asked how much for a chain breaker, they said $20 i said sold.
2 hours latter i was riding around looking like a grease monkey whith a big smile on me dial.

You cant go wrong. it took about a week to get here but worth the wait. Here is a pic

Cheers

Good hits Cooper, looks Good!

After all the conversations i had with people i nearly chickened out of going the whole 14/42 and was leaning toward the safer 14/40, not anymore!

I was tossing up whether to get the back sprocket teflon coated also, don't really know how much longer it will make the sprocket last though..

with the whole throwing the speedo out, just have to make sure i ride 5km's below the speed limit when there's a speed camera round i suppose!

i'm getting it when i get paid this weekend, but don't know whether its worth leaving it till next year, as postage from america this time of year might take ages... ??

SnypR · Post by **SnypR** » Wed Dec 12, 2007 4:57 pm

speedo gear is on the front wheel, change the gearing as much as you like.

BikerBoy · Post by **BikerBoy** » Wed Dec 12, 2007 5:00 pm

SnypR wrote:speedo gear is on the front wheel, change the gearing as much as you like.

even better news! good things these forums

thanks for the imput all

Cooper 6R · Post by **Cooper 6R** » Wed Dec 12, 2007 6:06 pm

BikerBoy wrote:Re: Chains and Sprockets
by SnypR on Wed Dec 12, 2007 8:57 am
speedo gear is on the front wheel, change the gearing as much as you like.

arr sorry to disapoint. if you have a ZX600-J. they have a Non- Contact Hall IC Type Speed Sensor. witch has a speed sensor on the sprocket case. as the big nut spins the sensor picks up the rev of the nut corners. a little computer thing dose the rest and displays it on the speedo.

My speedo is out by 10kmh at 100kmh, or make it 10% of whatever speed your doing.. the revs go up to 6000rpm at 100kmh up by 500rpm, but all so worth it. make sure you know what gear your in all the time. i found my self thinking im in second but am in third. after a little while you get the hang of it. It's a little like riding a new bike, It's like your misses getting a boob job, you have to get useto your babe all over again.

And over, and over, and over, sorry got carryed away.

Gosling1 · Post by **Gosling1** » Wed Dec 12, 2007 6:24 pm

SnypR wrote:speedo gear is on the front wheel, change the gearing as much as you like.

most late-model bikes its taken off the front sprocket - front *wheel* speedo drives are "Olds Kool"

SnypR · Post by **SnypR** » Thu Dec 13, 2007 11:10 am

so shall l disconnect the speedo cable that runs from my instrument cluster to my front wheel on my old skool 97 zx6r?? bikerboys sig says he has a 1996 zx6r unless he has updated bikes and not changed his sig.....

SnypR · Post by **SnypR** » Thu Dec 13, 2007 11:17 am

judging by the manual, the F model was the last of the front wheel gear driven speedos, sensor after that.

BikerBoy · Post by **BikerBoy** » Thu Dec 13, 2007 12:44 pm

SnypR wrote:judging by the manual, the F model was the last of the front wheel gear driven speedos, sensor after that.

Yep i'm on a 1996 ZX6R, think it is the F model.

I've got the hanes workshop manual at home, should tell me where the sensor is..

But geezz speedo being 10% off is huge!
showing 110 after only 100km's is a lot, especially if you plan on selling the bike..

I thought it might only be off by 2 or 3% ..

But if your right SnypR then it shouldn't be a problem for me on my old school ride.

BikerBoy · Post by **BikerBoy** » Thu Dec 13, 2007 12:46 pm

What year Zx6r you on cooper?

Cooper 6R · Post by **Cooper 6R** » Thu Dec 13, 2007 8:08 pm

I got 2001 model. If anyone knows how to readjust the speedo give me a yell.
it will be helpfull. ive been look in in the mannual and cant find anything.

I had a 1996 model once, they go pretty good. red and purple, I am sure that it was front wheel speedo driven as well.

Ill have to ask the guys at the shop where there having a DYNO SHOOTOUT this weekend. and guess what?.... What!..... there's going to be a hyabussa TTTUUURRRBBBOOO running on the DYNO. YES you read correct.... ill be getting video that ill try and post up somewhere. I might also be putting mine up there aswell. IF everyone is nice to me.

Anyway cheers.

IsleofNinja · Post by **IsleofNinja** » Thu Dec 13, 2007 9:12 pm

my 10 runs a GPS speedo healer... So far all readings past police speed displays have been spot on .. My gearing is 2T up on rear.

Cooper 6R · Post by **Cooper 6R** » Wed Feb 13, 2008 8:50 pm

Just recently i have disconnected the speedo to let the bikes k's catch up with the speedo. if i do that every now and then ill be happy.