Same principle as this rather ghey example:
(-8
Pimp My f'n Shag-Waaaah Baby !!!
-
BrettZZR
- VIP MEMBER
- Posts: 619
- Joined: Fri Apr 13, 2012 4:44 pm
- Bike: ZZR1100
- State: Western Australia
- Location: Perth
Re: Pimp My f'n Shag-Waaaah Baby !!!
If you are worried about heat at a spot then get him to tack another piece of metal with a 5mm air gap to the exhaust in that area. It is the best and most effective way of shielding. Can be fiddly getting it the right shape though.
Same principle as this rather ghey example:
(-8
Same principle as this rather ghey example:
(-8
-
Gosling1
- Team Donut
- Posts: 13823
- Joined: Mon Jun 20, 2005 9:30 pm
- Bike: Z900
- State: ACT
- Location: Anarchy Road
Re: Pimp My f'n Shag-Waaaah Baby !!!
nothing of significanceZedOne wrote:....Any updates Gos?......
- I did finally get the correct high-pressure power steering hose after an eternity of being dicked around, so that is a bit of progress......Next step is trial fitting of the motor/gearbox so that the final dimensions of the high-pressure hose can be determined.
".....shut the gate on this one Maxie......it's the ducks guts !!............."