05 ZX10R Brakes - Brembo Master Cylinder

[matt76]

Yeah Im keen to know where to get em too, my set up looks dodgy as

[robracer]

Here ya go Matt .........Brembo 19x18 Forged Brake Master Cylinder with Standard Lever

http://www.baysideperformance.com/index ... ts_id=6558" target="_blank

FIY the 19/20 one has 2mm more lever action but the 19/18 seems ok

[matt76]

Thanks

[Troy Pearson]

Rob if you send that info to us via this reply it would be great! No rush though, I wont be home until early April but I would like to order it so I have when I do get home!

Cheers Troy.

[robracer]

Rob if you send that info to us via this reply it would be great! No rush though, I wont be home until early April but I would like to order it so I have when I do get home!

Cheers Troy.

Which reply? just look up this page when you get back failing a site crash

[robracer]

Rob if you send that info to us via this reply it would be great! No rush though, I wont be home until early April but I would like to order it so I have when I do get home!

Cheers Troy.

Which reply? just look up this page when you get back failing a site crash

[Troy Pearson]

Thanks Rob, lucky I don't ride with my eyes closed!!

I was looking at around $400 AUD with resovoir, washers, double banjo and shipping.

[robracer]

Thanks Rob, lucky I don't ride with my eyes closed!!

I was looking at around $400 AUD with resovoir, washers, double banjo and shipping.

Yep easy get it for that, just make sure you order the double banjo (with pressure switch if needed) & remind them I orderd a double & they sent me a single ... must be something in the Canadian water

[Troy Pearson]

I just did a little research not that I don't trust you Rob. I just wanted to know if I was saving much money getting the Master Cyl from Canadiiiaaa!!

I called Gowanloch Ducati as they are stockists and they quoted me $675 for just the 18 x 20 Master Cyl alone!!

So if anyone else reads this again, go the Canadian route for your Brembo needs. I did an online estimate including shipping and it came to $411AUD.

Thanks again Rob,


Troy

[robracer]

I just did a little research not that I don't trust you Rob. I just wanted to know if I was saving much money getting the Master Cyl from Canadiiiaaa!!

I called Gowanloch Ducati as they are stockists and they quoted me $675 for just the 18 x 20 Master Cyl alone!!

So if anyone else reads this again, go the Canadian route for your Brembo needs. I did an online estimate including shipping and it came to $411AUD.

Thanks again Rob,


Troy

$411 im sure mine was just over $300 landed but the paperwork is with my accountant so I cant check
Troy there are a few different types of Brembo Radial MC's & it could be that gowies has the more expensive one's
Mine is Cast & I think the GP race ones are Billet but dont quote me on it
I looked at about 4-5 sites before ordering from Canada there was also one place in the states that was cheeper but looked suss so Canada it was ... it definently pays to shop around

[Wattie]

http://www.mcnews.com.au/testing/Kawasa ... /Page4.htm


read paragraph 5...

this guy must be like pedrosa's size...

using the stock brakes on setting 5

best brakes ever, what a dipshit!

[robracer]

WTF close to the bars he was probably riding in the rain & didnt even use them

[Wattie]

WTF close to the bars he was probably riding in the rain & didnt even use them

or didnt even go to the realease, and copped a pocketfull of goodies for a good story.


there is no way he was riding the same bike that was sold in the shops

[browserzx10]

Yep i got the brembo mater cylinder last year. Best thing i have ever done, the lever just doesnt fade at all anymore. I was able to use the standard resivior as the hose i got just went over the fitting on it. Must have been lucky i guess.

[robracer]

Well after finaly getting a chance to test out the new MC the verdict is...... Brilliant! there was no fade or lever pulling back to the bar so Im sold
+ now using blue dot 4 brake fluid from Bursons $7.00 for 500ml that will be changed twice a year great value!