Kawasaki Sportsbike Riders Club - Australia - Online Forum

a 60 shot/and the wheelie bars help alot at the strip.but i run without them sometimes not to get spoiled.

it's a hitch front wheel mount to tow suzukis.

iv'e seen tires do this.if it sat a while they might of picked up a flat spot.

check your fans .fuse maybe?

never saw that one before.us 500s were machiii 750s were mach ivs.weiscos are good pistons you need to make sure the ring don't bind on the pin when you gap the rings.

depends on what your target is.1tooth in front is about 3 rear.stock zx12 is 18x46-17x46 gives you alot more power in the bottom.17x49 is common for dragstrips.unless your making big power it don't pay to gear to tall 18x45 for more top end if you bypassed your restrictions.

190s are norm for the 12 now.i went with shinko ultra soft.very sticky just don't last.120/60/17 on front half inch lower with the 60.

rejet lean=hole in piston.check how your plugs are burning.you want a light tan.

the basket is weak for dragstrip runs or banging gears.muzzy welds the rivets.i went mtc-then used the muzzy drilled hub and sleeve.850.00 us total.http://www.mtceng.com/index.htm