Barge Powaaaahhhhhh !!!!

[Jonno]

Dont trust those error codes too much mate. they can lead you down an expensive path.

Barge looks sweet as

[Gosling1]

....will it be sorted by the supers?......

has to be - its bullshit how much fuel it goes through in 'limp-home' mode - yesterday I went for a ride with Pete - he could smell the richness when I pulled up next to him at traffic lights.....I am watching a couple of TB's on ebay motors and if they are still there on Thursday - will be ordering one of them. Its not too big a job to change these out.

.....Dont trust those error codes too much mate. they can lead you down an expensive path......

Barge looks sweet as ......

cheers mate. I was a bit suss about the error codes as well but Shiny actually picked the TB as being fucked (well the servo motor anyway) - a few months ago. He was here one day with PC and I turned the Barge on to start it - he commented straight away on the weird sounds the servo motor was making...........reckoned that his 05 sounded way different ?

I heard his 05 when we stayed at his place back in December for the track day - yep, his Barge sounded much crisper when the ignition was turned on, the sounds coming from the TB were heaps quicker and sounded better. Mine - they are really slow and obviously something has been wrong here for ages. I will hang onto my old TB in any case - if another TB comes up cheap then I will grab that and see if the motors can be swapped over.

Looking forward to getting back to normal fuel consumption on the mighty Barge......

[Gosling1]

gotta love US Ebay Motors........

some functional bling to replace the fuxxored stator cover.......

http://www.ebay.com.au/itm/310532150517?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649


and a good complete TB assembly with TPS's.......


http://www.ebay.com.au/itm/261357159594?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649


both of these should be here the week after next - plenty of time to replace the TB I would think

[timeeh]

it does look good in the flesh mate - for $450 delivered to the PO box, this bodywork will do the job until I source all the OEM '05 stuff from the US. In no hurry to do this but would like a complete set of stock bodywork tucked away in the 4th........

Got a website? at that price i might do the 9?

[Smitty]

will it be sorted by the supers?

will have to be... otherwise he walks

[Gosling1]

....will it be sorted by the supers?.....

.......will have to be... otherwise he walks ......

well I could ride the z650 but would need to leave a day early

expecting the new TB next week (or perhaps late this week) - got my fingers crossed this will sort out the problem.

[Smitty]

..............
Looking forward to getting back to normal fuel consumption on the mighty Barge......

never had a problem with consumption on the barge

does that mean my nuclear fluxalator is working ?

[Gosling1]

......never had a problem with consumption on the barge .......

only because you don't twist the throttle more than 5 degrees

[Wattie]

......never had a problem with consumption on the barge .......

only because you don't twist the throttle more than 5 degrees

Does he even ride it?

[mick12]

is there some difference between the 00 and 02 stator covers

[SteveW]

Yeah there is..

[Gosling1]

OK gronks - time for an update on the mighty BARGE yeh mofos

Many thanks to Brett at MotoGarage for sorting out the new PC5 for the mighty SportsBarge (2005 ZX12R). The old PC3 shat itself last year on the ride home from the Phillip Island Grand Prix Circuit - totes fuxxored. Replaced with a PC5, rego has been due since April 2014 - so the barge scored 6 months today....

Picked up from the shop today - mmmmm nice 160hp at the back wheel after mapping, up from 153. A few years ago, at both the Motogarage dyno and the Gecko dyno, the 12 pumped out 155. 160 was about exactly what I was hoping to see.......so a happy camper today.

Went for a quick test-strop this arvo - FMD its great to be back on a bike that makes serious (for a 10 year-old bike) - horsepower. Its just so good to be able to totally hose anything else out on the roads...............

Here is the chart



Looking forward to 6 months of fun now I have missed riding this bike.......

[BrettZZR]

Whaaa?!!

The first run done at 3:15pm and the temp entered was ~28C and humidity was 18%
The 'after' run was at 4:14pm but the temp entered was ~37C and humidity was 7%?!!

I think I know where your 6 horses came from!!!

/,8'

[Six Addict]

nice work bubba!!

[Glen]

Good to see the Lord Humungus back on his rightful steed