Rattle, Clang-Clang, Rattle, Tick-Tick-Tick-Clang, Rattle

For general Technical and Performance Discussions

Rattle, Clang-Clang, Rattle, Tick-Tick-Tick-Clang, Rattle

Postby I-K » Tue May 17, 2005 12:39 am

Man!

After all the years on the super-smooth electric-shaver Six, I'd forgotten how mechanically noisy a bike can get when there's three times as much moving part mass behind the same thickness of crankcase outwer wall.

After it spent four and a bit months levitating up on stands, mostly, I finally borrowed the plate off the Six and took my C1 Nine out for a test-toast around Belconnen a few minutes ago. The rear shock definitely needs a stiffer spring, the front brakes are still irritatingly squishy despite braided lines (bugger changing pads before their time, though; the thing still pulls up plenty good), but that's about it for complaints... apart from the amount of clunks, clatters, rattles and whirring coming from the engine.

I'm not overly worried because the power is there and the gearbox is smooth, but still... are they all like that?
I-K
KSRC Contributor
KSRC Contributor
 
Posts: 1035
Joined: Sun Jan 02, 2005 3:22 pm
Location: Sydney (again...)
Bike: Suzuki
State: New South Wales

re: Rattle, Clang-Clang, Rattle, Tick-Tick-Tick-Clang, Rattl

Postby Nanna10r » Tue May 17, 2005 12:53 am

Dont know about the C1 I-K but my F1 has Ticked pretty loudly from new. Now 25000ks later still ticking away no dramas. Less noticeable with the Remus camouflague though, I recently changed back from Fully synth to semi syth oil n noticed the gearbox seems happier about it. Firmer selection n less false neutrals 3rd to 4th.
hth
Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

re: Rattle, Clang-Clang, Rattle, Tick-Tick-Tick-Clang, Rattl

Postby hammer » Tue May 17, 2005 7:46 am

The c1 i had made far less engine noise than the f2 which i traded to after the c1 gearbox expolde rebuild thing.

Stu
Ride it like you hate it
User avatar
hammer
Team Black
 
Posts: 437
Joined: Wed Nov 03, 2004 9:01 am
Location: Brisbane
Bike: It's not worth Mentioning
State: Queensland

re: Rattle, Clang-Clang, Rattle, Tick-Tick-Tick-Clang, Rattl

Postby MickLC » Tue May 17, 2005 9:17 am

I never really got to hear mine too well 'cause the Yoshi was too noisy, but the noises I did hear were like what you are describing.
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
MickLC
Team Crim
 
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 11 guests