2010 z1000 indicators...

[vanrootn]

On the weekend i replaced my oem indicators with some smaller ones to suit the fender elim.

I bought some with standard globes as i assumed led's would flash too fast

The problem is these new indicators flash too fast anyway

So i took out the flasher relay and it says on the front 10w + 21w + LED. Does this mean the globes need to be 10 or 21w to flash correctly? Does this also mean i could have bought LED's after all

the new globes are 23w unfortunately....

[hoffy]

Hey mate, you can get fender elims that take the standard indicators, best solution I reckon as they look pretty good..check this out,

http://www.ebay.com.au/itm/Kawasaki-Z10 ... 2eba9681dd

[hoffy]

Hey mate, you can get fender elims that take the standard indicators, best solution I reckon as they look pretty good..check this out,

http://www.ebay.com.au/itm/Kawasaki-Z10 ... 2eba9681dd

[vanrootn]

Too late for that! I had my standard ones mounted to the elim I have but I found they stuck out too far and I kept on booting them as I got on the bike hence the smaller ones...

[vanrootn]

If I had my chance again I would have bought something similar to that...

[hoffy]

Yeah on that elim they sit in closer together...which is good..

[Phil]

Yeah on that elim they sit in closer together...which is good..

Makes yer bum look bigger but

[hoffy]

Yeah on that elim they sit in closer together...which is good..

Makes yer bum look bigger but

not if your covering it with a massive arse top box it dont