04 zx-6r suspension recommendation

For general Technical and Performance Discussions

04 zx-6r suspension recommendation

Postby wilf » Wed Nov 03, 2010 6:03 pm

Hurro,

I have a 04 zx-6r and went for a long-ish ride the other week (first time all the way to singleton on Putty RD). This road has a few bumps and it exposed the terrible suspension settings on the bike. The rear wanted to throw me off on .every. bump I hit at or over 80ks, front tank slapped with both hands on bars which killed confidence and nearly me :shock:. And generally felt like it bashed me around for the whole ride, certainly kept jamming my lower body into my top half which gave me a few cramps. I just didnt even sit on the seat for a lot of the way and put my weight on the pegs instead. In an attempt to see if I could ease this Ive pretty much turned everything down on the back, and went with a softer-ish setting in the front. I'm a featherweight so preload is backed right off both ends already. I dont think this has worked, especially the rear. the front I think is not too bad as there is still a bit of adjustment to play with. For the record, I wasnt going that fast either, as the tank slap was pretty early in and I didnt feel comfortable going more then a moderate pace, plus the bumps were killing me with the cramps.

It has been to Eastern Creek and I thought it was fine there though, I think the track just just heaps smoother without the jagged bumps.

Can anyone recommend me something? Maybe a workshop that may be able to help? Can the springs just be changed to a lower rating? Im more concerned about the rear, the front might just need to be set properly?

Thanks
User avatar
wilf
KSRC Member
KSRC Member
 
Posts: 100
Joined: Sun Jan 17, 2010 8:44 pm
Location: Hills, Sydney
Bike: ZX6R
State: New South Wales

Re: 04 zx-6r suspension recommendation

Postby Wattie » Wed Nov 03, 2010 6:17 pm

Www.zenodamper.com.au

Zeno has owned a couple of this model zx6 and has tried lots of different things with them.
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Wattie
VIP MEMBER
VIP MEMBER
 
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Location: Bligh Park
Bike: ZX10R
State: New South Wales

Re: 04 zx-6r suspension recommendation

Postby wilf » Wed Nov 03, 2010 6:35 pm

oh nice, will give them a go. Thanks!
User avatar
wilf
KSRC Member
KSRC Member
 
Posts: 100
Joined: Sun Jan 17, 2010 8:44 pm
Location: Hills, Sydney
Bike: ZX6R
State: New South Wales

Re: 04 zx-6r suspension recommendation

Postby ttc » Wed Nov 03, 2010 7:05 pm

well, you did buy a Barra... :)
Image
User avatar
ttc
Team Black
 
Posts: 2893
Joined: Fri Nov 19, 2004 2:59 pm
Location: Brisbane
Bike: Z1000
State: Queensland

Re: 04 zx-6r suspension recommendation

Postby wilf » Wed Nov 03, 2010 7:44 pm

I didnt understand why it was referred to as a Barra before, I found out first hand haha.
User avatar
wilf
KSRC Member
KSRC Member
 
Posts: 100
Joined: Sun Jan 17, 2010 8:44 pm
Location: Hills, Sydney
Bike: ZX6R
State: New South Wales


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 11 guests