Tyre Sizes - 1996 ZX6R

ZX2R, ZXR400, ZXR750, ZX6R, ZX7R, ZX9R & ZX12R & others.

Tyre Sizes - 1996 ZX6R

Postby wullieb1 » Thu May 07, 2009 8:59 am

Hey all,

Right bit of a dilema for me at the moment.

Rear tyre on the ZX6r is currently a 190/60 17 but from my research it should have a 160/60 17.

Now the front is ok as its a 120/60/17 and looks ok but i'd prefer to replace both to the same type as the rear is pretty shot.

What size should i get???

Am i better sticking with the original size or upgrading to a bigger rear???
wullieb1
KSRC Member
KSRC Member
 
Posts: 268
Joined: Mon May 04, 2009 12:05 pm
Location: Brisbane
Bike: ZXR750
State: Queensland

Re: Tyre Sizes - 1996 ZX6R

Postby Gosling1 » Thu May 07, 2009 6:56 pm

A bigger rear ??? It will work fine with a stock 160/60x17 on the back. Going bigger will just make the steering *less sharp*.

You should use a 120/65 on the front, instead of a 60 profile. The slightly higher profile works better on these bikes.....

Check with Hoffy about correct tyre pressure !

:kuda:
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Re: Tyre Sizes - 1996 ZX6R

Postby Poyda » Thu May 07, 2009 11:13 pm

I had the 190 off my old ZX9 on the back of my ZX6 and it handled ok, but just ok. When i went to the 160 it turned much better. And as Gos said go for the 65 on the front, any help in turning these old girls is always appreciated.

About 22psi is good isn't it Hoffy :twisted:
Pete

The (no longer) ugly 96 ZX6R
And now with another Purple and Orange 96 ZX9R
User avatar
Poyda
VIP MEMBER
VIP MEMBER
 
Posts: 365
Joined: Mon May 09, 2005 4:38 pm
Location: Springwood, NSW
Bike: ZX6R
State: New South Wales

Re: Tyre Sizes - 1996 ZX6R

Postby Strika » Thu May 07, 2009 11:16 pm

Gosling1 wrote:A bigger rear ??? It will work fine with a stock 160/60x17 on the back. Going bigger will just make the steering *less sharp*.

You should use a 120/65 on the front, instead of a 60 profile. The slightly higher profile works better on these bikes.....

Check with Hoffy about correct tyre pressure !

:kuda:


Trust me Gos, a 70 profile front tyre on this model will work much better!! The 60's and 65's are bastids of things on them.
As for the rear, stick with the stock sizes. I still run a 160 rear on my racer which is an F model 6 also! You can run a 170 if you can find one to fit. But a 160 makes em steer fuckin noice!!!

As for running a 190 on the back! Whoever put that on is a fucktard!!! A 190 pulls around too much as the rim is smaller than suitable for a 190. We even tried 180's when racing them, but once again, the rims too skinny and it pulls the sidewalls around too far compromising the contact patch at full lean and making them let go much easier.
"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me" Hunter S. Thompson.
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
User avatar
Strika
VIP MEMBER
VIP MEMBER
 
Posts: 8373
Joined: Tue Feb 01, 2005 8:02 am
Location: Melbourne
Bike: Yamaha
State: Victoria

Re: Tyre Sizes - 1996 ZX6R

Postby robracer » Fri May 08, 2009 5:58 am

Yeah what he said :D ... stick as close as you can to the reccomended tyre sizes, nothing macho about a fat rear tyre when your bike is laying in the gutter ;)
User avatar
robracer
VIP MEMBER
VIP MEMBER
 
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Location: Port Macquarie
Bike: ZX6R
State: New South Wales

Re: Tyre Sizes - 1996 ZX6R

Postby Wattie » Fri May 08, 2009 7:31 am

Supersport 600's are running 200 rears :kuda:

according so one of the Kwak Riders, you can lean en till your bars touch the ground and still have plenty of tyre left :lol:

russ is runnin the 200 rear on his 10, farrrrkin awesome!


but i'd be going a 180, common, well priced and decent.
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Wattie
VIP MEMBER
VIP MEMBER
 
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Location: Bligh Park
Bike: ZX10R
State: New South Wales

Re: Tyre Sizes - 1996 ZX6R

Postby robracer » Fri May 08, 2009 7:41 am

Wattie wrote:Supersport 600's are running 200 rears :kuda: .

Yeah but that is on a modern sportsbike Wattie... judging on the tyre size stated the six in question could be over 10 years old.
User avatar
robracer
VIP MEMBER
VIP MEMBER
 
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Location: Port Macquarie
Bike: ZX6R
State: New South Wales

Re: Tyre Sizes - 1996 ZX6R

Postby wullieb1 » Fri May 08, 2009 8:20 am

Magic folks.

Stock sizes it is then.
wullieb1
KSRC Member
KSRC Member
 
Posts: 268
Joined: Mon May 04, 2009 12:05 pm
Location: Brisbane
Bike: ZXR750
State: Queensland

Re: Tyre Sizes - 1996 ZX6R

Postby robracer » Fri May 08, 2009 9:03 am

wullieb1 wrote:Magic folks.

Stock sizes it is then.


Can you please tell us the year model?
User avatar
robracer
VIP MEMBER
VIP MEMBER
 
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Location: Port Macquarie
Bike: ZX6R
State: New South Wales

Re: Tyre Sizes - 1996 ZX6R

Postby Six Addict » Fri May 08, 2009 9:09 am

its a 96 and it runs 160 as standard... the they moved up to 170 standard read then by the J series they were running 180 rear...

for starters a 160 rear will be cheaper!! and the 200 rear would be nice but its prolly a 200/65 or something...so doesnt really count as a comparo to a road tyre
DUCATI HYPERMOTARD 2014
User avatar
Six Addict
Pinchy
Pinchy
 
Posts: 6465
Joined: Sun Apr 06, 2008 3:51 pm
Location: Darlinghurst, Sydney
Bike: Ducati
State: New South Wales


Return to ZX-R Older Model Discussion

Who is online

Users browsing this forum: No registered users and 5 guests