Pegboard....

[Slow and wobbly]

Peg board is too expensive, plus the pegs fall out.
Use a sheet of MDF or melamine. Place it flat on the bench. Lay your tools out in position and bang in some screws to hold them in position. Then hang the board up and hang your tools. Viola! Find em every time. Unless like me you've spent more than 2 hrs in the garage and used everything on the board and cant find anything because you dont put them back .
Outines are for Fags and sociopaths.
Throw all that imperial shit in the bin, thats what shifters are for. Unless your a closet Harley owner. The Metric system was introduced in 66 - 42 years ago! Why cant you get a decent priced tool set in this day and age without all the useless tools you'll never use? Yes I know they are out there and yes I Iknow there are many car enthusiasts that still play with Fords and GM what use this odd imperial system. I have looked and not found - if anyone can point towards a well priced and quality metric only tool set please do.

[Ratmick]

Outines are for Fags and sociopaths.

Well I agreed with everything but this bit, as I'm neither...

Outlines are actually so you can tell which tools your kids have taken to tinker with their bikes, rollerblades or scooters AND LEFT IN THE EFFING RAIN. Then you can go find them and deduct the exact amount from their pocket money...and they get a rusty tool in return. Normally this only has to be done once. Per child.

I have vowed never to buy a vehicle that requires imperial-sized tools again, hence I only have metric spanners/sockets (and four different sized shifters).

Actually that's not 100% true - I do have few imperial spanners as I have found a few on the side of the road over the years. Alas for some reason they all seem to be 1/2" / 9/16" ring or open-ended spanners .

Mick

[Slow and wobbly]

Given that beer has been around long before all else I still have to use imperial sizes daily at work. All sizes are still imperial. Most common are 9/16 and 5/8 plus 1 1/16 for spanners. Our standard beerlines are still imperial mixed with metric smaller dia risers and such. its a PITA having to mix and match new and old equipment. Partly because beside from my employer everything comes from OS and thus Europe or the good ol'.

[the kid]

and bang in some screws - if anyone can point towards a well priced and quality metric only tool set please do.

Why in Pharks name would you want good tools
And Bahco have a ripper small 3/8 drive socket set in metric only . Just bought some Kingchrome openender ratchet rings (metric set) Also have a Stahlewillie metric only openender /ring set . How good a quality do you want ?? Also got a set of Sunflag screwdrivers that are metric as well . Noice they are
You have been pointed

[Smitty]

...metric??

work in the plumbing industry and get used to blokes talking about
½" nipples

[craig]

bet aardys avitar's got 1/2 inch nipples ...........

[Gosling1]

...... Anyone found an easy way to stop the hooks/pegs falling out of the pegboard every time you take your F&%KING tools off??......

Yep - take the pegboard and those f'n pegs, and place the lot into a local skip.

Problem fixed !!

Tools go in the toolbox. Not on the wall !!

[craig]

yep shadow boards are for old primary producers who can't find their tools...cos they leave them all over the shed like most of us..........well me anyway....and tool boxes are something you trip over in the dark looking for a light switch....to find the tools you should have put back in the tool box...

[6maniac]

bet aardys avitar's got 1/2 inch nipples ...........

Btw Aardy... can you edit the avitar so that she moves the shorts verrrrrrrrrrrry slowly ?

[craig]

he's not listening........er looking

[aardvark]

he's not listening........er looking

Yeah, I am... I just haven't figured out how to do it yet.

[Disco]

he's not listening........er looking

Yeah, I am... I just haven't figured out how to do it yet.

You can slow down a .gif image in fireworks if you have it.....If you dont I'll give it a go for you if you want.....

Had a look at it and its 22frames ....Could be slowed down a fair bit.....

[6maniac]

he's not listening........er looking

Yeah, I am... I just haven't figured out how to do it yet.

You can slow down a .gif image in fireworks if you have it.....If you dont I'll give it a go for you if you want.....

[Disco]

This is half the speed....

[6maniac]

Very good, Dave....now can we get her to hold them up for longer before it repeats ?