Gear changes 06 ZX6R Track Bike

ZX6R, ZX10R, ZX14R, Ninja 1000 etc

Gear changes 06 ZX6R Track Bike

Postby robracer » Sun Dec 14, 2008 8:27 am

The blue bullet got its first workout yesterday & the first noticeable thing was up shifts going down the straight, I would normally change up without a clutch all the time but the six on a few occasions on hitting redline would not change & required a real heavy foot to engage the gear is this normal?
Being a new bike it could just be rider input error but none of my other bikes have been this hard to engage gears down the straight.
User avatar
robracer
VIP MEMBER
VIP MEMBER
 
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Location: Port Macquarie
Bike: ZX6R
State: New South Wales

Re: Gear changes 06 ZX6R Track Bike

Postby Plaz » Sun Dec 14, 2008 2:46 pm

Mate,
I never used the clutch up or down on my 05 636 but until about 3000k's it took a bit of ankle pressure now it's just the slightest up tilt and the tinniest blip on the downs she changes no issue.

BTW do you have rear set on the 6?
User avatar
Plaz
Team Ninja
 
Posts: 1983
Joined: Wed Nov 10, 2004 7:04 pm
Location: Adelaide SA
Bike: Z1000
State: South Australia

Re: Gear changes 06 ZX6R Track Bike

Postby SoundGuy » Sun Dec 14, 2008 3:02 pm

robracer wrote:The blue bullet got its first workout yesterday & the first noticeable thing was up shifts going down the straight, I would normally change up without a clutch all the time but the six on a few occasions on hitting redline would not change & required a real heavy foot to engage the gear is this normal?
Being a new bike it could just be rider input error but none of my other bikes have been this hard to engage gears down the straight.


I'm sorry to have to tell you that your bike is broken and i think you should sell it to me asap :kuda:
User avatar
SoundGuy
KSRC Contributor
KSRC Contributor
 
Posts: 1719
Joined: Wed Aug 22, 2007 1:22 pm
Location: Sydney
Bike: ZX10R
State: New South Wales

Re: Gear changes 06 ZX6R Track Bike

Postby robracer » Sun Dec 14, 2008 3:45 pm

Plasma Blue 636 wrote:BTW do you have rear set on the 6?
no rear set's yet but I might have to invest.... I found the toes scraping on both sides forcing me to adjust my old habits of toe on the very end of the pegs, maybe one day on the bike is not enough to get used to it ....but it did feel good :P
& Fred bite me! that a comment I would expect from Cath :lol:
User avatar
robracer
VIP MEMBER
VIP MEMBER
 
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Location: Port Macquarie
Bike: ZX6R
State: New South Wales

Re: Gear changes 06 ZX6R Track Bike

Postby Wardy » Wed Dec 17, 2008 5:28 pm

Had no problems upshifting with the 06' 636 without clutch. I always use clutch to downshift though. Reckon it'll be a timing thing between applying pressure to changer and backing off throttle. More time on the bike will be the only way to tell. So come to EC on the 8th Jan!!!!
06' zx6r limited edition
User avatar
Wardy
KSRC Member
KSRC Member
 
Posts: 269
Joined: Wed Nov 15, 2006 6:57 am
Location: Yerrinbool, NSW
Bike: ZX6R
State: New South Wales

Re: Gear changes 06 ZX6R Track Bike

Postby robracer » Wed Dec 17, 2008 6:09 pm

Booked in today 8) see you there!
User avatar
robracer
VIP MEMBER
VIP MEMBER
 
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Location: Port Macquarie
Bike: ZX6R
State: New South Wales

Re: Gear changes 06 ZX6R Track Bike

Postby JerkFace » Tue Dec 23, 2008 12:07 pm

Im having the same problem with my '07 10. I wasnt using the clutch at the its first track day and it didnt like it... Had a few track days since then and have to use the clutch, and still having trouble to get it to shift up when the revs are high. Even had it hitting false nuetrals a few times!
I think Im gonna trade the fat b***h in for an 08.
User avatar
JerkFace
Newbie
 
Posts: 6
Joined: Mon Sep 24, 2007 10:17 am
Bike: ZX10R
State: New South Wales


Return to ZX-R / Ninja Current Model Discussion

Who is online

Users browsing this forum: No registered users and 6 guests