Any body build retaining walls in Brisbane ????

Non Bike related Discussion - no politics or religion pls.

Any body build retaining walls in Brisbane ????

Postby Sulli » Fri Feb 23, 2007 11:29 am

I've had a busy time of late getting ready to build a new house and putting the old one on the market. Before building commences I need to put a small retaining wall across the back of the property so just as a thought I would post it up if some one does this for a living :?: can they PM me
Nostradamus probably got it right
User avatar
Sulli
KSRC Contributor
KSRC Contributor
 
Posts: 1096
Joined: Tue Jun 21, 2005 7:12 pm
Location: Brisbane/southside
Bike: ZX9R
State: Queensland

Postby Glen » Fri Feb 23, 2007 1:39 pm

Don't do it for a living and I'm not in Brissy so you're probably thinking wtf are you doing posting here, however.....

Retaining walls are really easy so long as you follow a couple of basic rules. If its logs, make sure the posts are in the graund as far as they are out. Level the bottom surface, dig the two end holes and concrete the logs in, use a level to make sure they are at the same angle (sloping back very slightly to the ground youre supporting). Work out where you need the holes in between ie the length of your logs, dig the holes, run a stringline top and bottom between the two end logs and place your posts in line with the string. Concrete the posts in and then whack in the horizontals, nailing them in with spikes (drill holes first). There you go one smick looking retaining wall.

Get a bunch of mates over who will work for beer and burnt meat and it's even easier
It's really all about standing around drinking Dave's beer.
2008 ZRX1200 Greeeeen Roadie
2016 KTM Superduke 1290 Oraaaaange
2016 Seadoo RXTX300
Too many toys.......work is getting in the way!!!!
User avatar
Glen
VIP MEMBER
VIP MEMBER
 
Posts: 7268
Joined: Mon Apr 18, 2005 10:30 am
Location: Kellyville
Bike: ZRX
State: New South Wales

Postby Felix » Fri Feb 23, 2007 5:37 pm

My brother had a retaining wall done by some old guy who is "retired" but does a bit of bricklaying to keep himself active. Did quite a good job, I'll see if I can track down his number.
- Team Furball -

Image
Felix
KSRC Contributor
KSRC Contributor
 
Posts: 1173
Joined: Thu Sep 02, 2004 1:54 am
Location: Osaka
Bike: Suzuki
State: Overseas

Postby Sulli » Fri Feb 23, 2007 7:23 pm

Thanks for the reply I'm getting plans done as it has to be compliant with the building services code and don't really have the time to do it myself. If any one can recommend a business that they have had dealings with and have been satisfied with their service pass that along as cold calling usually doesn't produce the results.
Felix if you can find that no. pass it on and I will contact him
:)
Probably lookin at concrete sleepers ATM but keeping an open mind :roll:
Nostradamus probably got it right
User avatar
Sulli
KSRC Contributor
KSRC Contributor
 
Posts: 1096
Joined: Tue Jun 21, 2005 7:12 pm
Location: Brisbane/southside
Bike: ZX9R
State: Queensland


Return to Off Topic Discussion

Who is online

Users browsing this forum: No registered users and 19 guests