ZX6 - Weird idle

ZX6R, ZX10R, ZX14R, Ninja 1000 etc

ZX6 - Weird idle

Postby axza » Sun Oct 22, 2006 6:31 pm

Hey All,

Just got my 6 a couple of months ago, just today it's developed a kind of.. lumpy idle. It's done 2800 k's and I regularly take it into the hills, it had its first track day last week and the WIMA pink ribbon ride this morning which is when it seems to have developed this 'problem'.

Normally when the engine is hot (60 - 100c) and you start it, it will idle straight to 1100 - 1200 and it sounds quite even, flat if that makes sense. Now what it's doing is with a hot engine the automatic choke is kicking in it's peaking to 2k rpm then dropping back down to where it should be, but it's fluctuating a little also, and it has this weird lumpy idle, instead of the flat note that it used to make.

I guess what I'm asking is whether this is something that I should worry about, or whether anyone has an idea what may be causing this. I'm thinking I might drop by the local K dealer and ask them tomorrow morning/afternoon to see if it's normal, or maybe I'm just dreaming.

Any help appreciated.
axza
Newbie
 
Posts: 15
Joined: Wed Oct 11, 2006 9:10 pm

Postby Saki » Sun Oct 22, 2006 6:48 pm

my 06 6R has only 600k on the clock, but when its dead cold it peaks and idles around 2k then drops to 1200rpm but i know the flat sound u r talking about, but every now and then it starts lumping a bit, then will return to the flat sound. Depends how closely u listen to it
User avatar
Saki
KSRC Contributor
KSRC Contributor
 
Posts: 2167
Joined: Wed Feb 22, 2006 5:59 pm
Bike: ZX10R
State: Western Australia

Postby axza » Sun Oct 22, 2006 7:00 pm

Yeah, mine still does that when it's stone cold, but it acts differently when it's nice 'n warm - or used to. I think I'm probably dreaming but I thought I'd pose the question anyway.
axza
Newbie
 
Posts: 15
Joined: Wed Oct 11, 2006 9:10 pm

Postby Plaz » Sun Oct 22, 2006 9:14 pm

Year and model mate?....any mods?.....My 05 636 "hunts" (up and down in revs) a bit at idle, but I put that down to the Micron pipe and no exhaust valve.
User avatar
Plaz
Team Ninja
 
Posts: 1983
Joined: Wed Nov 10, 2004 7:04 pm
Location: Adelaide SA
Bike: Z1000
State: South Australia

Postby Barrabob » Sun Oct 22, 2006 9:45 pm

Do they still do a throttlebody sync as part of a 6000km service might be a bit of that which will cause a lumpy idle.
If I rode my bike at the speed of light, what would happen when I switched on its headlights?

Image
Barrabob
KSRC Contributor
KSRC Contributor
 
Posts: 1882
Joined: Sat Sep 18, 2004 11:00 am
Location: Brisbane

Postby axza » Sun Oct 22, 2006 10:27 pm

Ahh sorry, it's an 06 ZX636.

Yeah, it does sound like it's hunting a bit if I have the right use of the word.

I might do that check with the kwaka boys and see what they think.
axza
Newbie
 
Posts: 15
Joined: Wed Oct 11, 2006 9:10 pm

Postby FrogZ » Sun Oct 22, 2006 11:15 pm

I am going to say it IS the lumpy idle
Those things SCREAM and they have lumpy cams
ZZR250s are worse.
Just because you CAN ride, doesn't mean you SHOULD
FrogZ
KSRC Contributor
KSRC Contributor
 
Posts: 2090
Joined: Tue Apr 11, 2006 12:58 pm
Location: Rockhampton CQ


Return to ZX-R / Ninja Current Model Discussion

Who is online

Users browsing this forum: No registered users and 12 guests