Kawasaki Sportsbike Riders Club - Australia - Online Forum

Well I had this spare screen laying about and was sick of all the rocks that managed to pass through the one fitted on the bike "holes too big I reckon" so I fitted the second one over the first one, but offset it so it closed the gaps somewhat. I also set the screens out off the face of the cooler a bit so that any rocks that passed through would fall down and out. Before this the rocks would sit against the cooler, trapped by the screen and no doubt vibrate madly against the thin alloy

the second one is held in place by a single bolt and 4 cable ties. Unfortunately it was a different size and only one bolt hole matched, so I took the easy way out

the flower was in my back yard, I put it in as well, for all the pretty girls that come here

Here I was, thinking u had put the flower in ur oil cooler screen

speakin of those guards, etc. i've lost the little guard that fits into the lower cowling below the radiator, anyone got an idea ow much im up for to get a new 'un? i havent approached a wrecker about it however and thought i'd ask for any ideas..

Mike send me a cardboard template & i'll see if i can make you one.

Good thinking Frank here's the Radector and Oil Radector on Yappa's 6r.
Just made up the black stainless mesh to fit to the original guards.

Excuse the pic qualirt it doesn't shrink well.

mike-s wrote:speakin of those guards, etc. i've lost the little guard that fits into the lower cowling below the radiator, anyone got an idea ow much im up for to get a new 'un? i havent approached a wrecker about it however and thought i'd ask for any ideas..

call kawasaki and price a new one, you might get a surprize Some things are shitfully expensive but others are reasonably priced. When i went looking for stuff they wanted $650 for a new oil cooler but only $80 for a set of throttle cables. I told them to jam the cooler but I bought the cables.

If that doesn't pan, call Brett.

$56 from kawasaki, just got to wait the 2-3 weeks for it to come from japan, lucky me!!

Thanks though Brett, i went OEM simply 'cause the mounting bracket would be a bit of a p.i.t.a. to replicate.