Page 1 of 1
rubber grommets
Posted: Wed Sep 14, 2005 9:19 pm
by Simmo_ZX9R
Please help...
Gotta drill a hole in the belly pan of the bike about 20-25mm in size to meet GCR's...now l know how to drill the hole but you guys got any suggestions as to where l would get some blank grommets to fit the 20-25mm hole??
Any info is appreciated!!!
Posted: Wed Sep 14, 2005 9:27 pm
by bigtez
try your nearest boat and marine retailer. they should be using them to run wires in alloy boats.
Posted: Wed Sep 14, 2005 9:43 pm
by Gosling1
If you mean a solid rubber blanking plug, just drop into your local Commodore wreckers and grab one of the rubber plugs that fit into holes in the boot - drainage plugs I think ? they are very close to 25mm across.
cheers
RubberBootButtPlugDave
Re: rubber grommets
Posted: Wed Sep 14, 2005 9:58 pm
by Blue14
Simmo_ZX9R wrote:Please help...
Gotta drill a hole in the belly pan of the bike about 20-25mm in size to meet GCR's...now l know how to drill the hole but you guys got any suggestions as to where l would get some blank grommets to fit the 20-25mm hole??
Any info is appreciated!!!
Mate go to purple pig in mcintyre rd sunshine. or rare spares in gilbert rd preston.
Re: rubber grommets
Posted: Wed Sep 14, 2005 10:04 pm
by Smitty
Simmo_ZX9R wrote:Please help...
Gotta drill a hole in the belly pan of the bike about 20-25mm in size to meet GCR's...now l know how to drill the hole but you guys got any suggestions as to where l would get some blank grommets to fit the 20-25mm hole??
Any info is appreciated!!!
Simmo
Repco (and autobarn i think)
sell lil' packs of grommets
from about 5mm up to 32mm
cost me $6 a few years for the pack with about 10 grommets
in it
take ya pick from 'blanking' grommets (no hole)
or wiring/harness ones (mit hole)
cheers
Posted: Wed Sep 14, 2005 10:06 pm
by Nanna10r
Goose one of your best heheheheheheheeee;
Cheers Brett
Posted: Wed Sep 14, 2005 10:23 pm
by Gosling1
*takes a bow*
Posted: Sun Oct 30, 2005 6:26 pm
by zxsixr03
Take apart the glass bong and use that....
Posted: Sun Oct 30, 2005 8:05 pm
by Gosling1
Posted: Sun Oct 30, 2005 8:24 pm
by smek
you could try off ya tree ;P
Posted: Sun Oct 30, 2005 8:36 pm
by HemiDuty
Shit I guess I will have to do this too.....
I hate effort.
Re: rubber grommets
Posted: Tue Nov 01, 2005 10:03 pm
by Ratmick
Simmo_ZX9R wrote:Please help...
Gotta drill a hole in the belly pan of the bike about 20-25mm in size to meet GCR's...now l know how to drill the hole but you guys got any suggestions as to where l would get some blank grommets to fit the 20-25mm hole??
Any info is appreciated!!!
If all else fails let me know your address and I will mail you the one I found in the shed this arvo...
...gotta love Melbourne Cup holidays
Couldn't give a stuff about the horse race though, I just like the day off. It's not a public holiday up here either, so the shops are open. Given I only get 3 hours on a Saturday to do all the local shopping this is a bonus.
Posted: Wed Nov 02, 2005 11:21 pm
by HemiDuty
Just threw a Valiant item in mine today. Works great!
