Running out of rebound front end chatter
- mark1
- Warming up
- Posts: 95
- Joined: Tue Sep 22, 2009 6:54 pm
- Bike: ER6
- State: New South Wales
- Location: one step beyond
Running out of rebound front end chatter
took the old GPX250 to Ruapuna for a ride day(public NZD120 club NZD70 all bikes in together for 30 minutes every hour)The front started chattering on high speed corners.Apart from rebuilding front suspension I am thinking if I moved my body weight towards the rear this would lessen the load on the front?
RIDE FREE
Mark1
Mark1
- Wattie
- VIP MEMBER
- Posts: 10041
- Joined: Mon Oct 31, 2005 12:23 pm
- Bike: ZX10R
- State: New South Wales
- Location: Bligh Park
Re: Running out of rebound front end chatter
Is the front wheel balanced?
Rim straight?
Tyre good?
Try and work out why its doing it rather than hiding it in suspension.
Rim straight?
Tyre good?
Try and work out why its doing it rather than hiding it in suspension.
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
- MadKaw
- Administrator
- Posts: 9671
- Joined: Tue Apr 20, 2004 4:33 pm
- Bike: ZX10R
- State: New South Wales
- Location: Windsor or the Creek..
- Contact:
Re: Running out of rebound front end chatter
After checking its straight as Wattie suggested - and most gpx's aren' - try heavier fork oil and 20 cents coins as preload adjusters.. I think we went 15 wt oil and 60 cents in each side on the wifes old GPX...
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.

I ride way too fast to worry about cholesterol
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.

I ride way too fast to worry about cholesterol
- mark1
- Warming up
- Posts: 95
- Joined: Tue Sep 22, 2009 6:54 pm
- Bike: ER6
- State: New South Wales
- Location: one step beyond
Re: Running out of rebound front end chatter
cheers guys
Wheel true and balanced,already running heavier oil.My next step is to replace the front tyre,Pirelli?
Wheel true and balanced,already running heavier oil.My next step is to replace the front tyre,Pirelli?

RIDE FREE
Mark1
Mark1
- Greenblood
- VIP MEMBER
- Posts: 1069
- Joined: Wed Apr 19, 2006 8:38 am
- Bike: Other Kawi
- State: New South Wales
- Location: Penrith
Re: Running out of rebound front end chatter
I am having the same problem with my track bike under brakes, I think it's the steering head bearings that are be the issue for me as everything else is OK....have you checked them?
2017 ZX10RR Road
2006 ZX6R Race Bike
1997 ZX7R Pirate MkII
2006 ZX6R Race Bike
1997 ZX7R Pirate MkII
- mark1
- Warming up
- Posts: 95
- Joined: Tue Sep 22, 2009 6:54 pm
- Bike: ER6
- State: New South Wales
- Location: one step beyond
Re: Running out of rebound front end chatter
Bearings appear to be ok ,will replace tyre and see this weekend
RIDE FREE
Mark1
Mark1
Re: Running out of rebound front end chatter
Race spec bikes have been known to suffer 'CHATTER' but i've never envisaged a humble GPX250 could cut it ?? 

- Gosling1
- Team Donut
- Posts: 13823
- Joined: Mon Jun 20, 2005 9:30 pm
- Bike: Z900
- State: ACT
- Location: Anarchy Road
Re: Running out of rebound front end chatter
Mark - I suffered a lot of front-end chatter on Billy's LC350 at the Island Classic a few years ago. One of the boys - thanks Steven Kairl
- suggested I put a lot more weight over the front end......the chatter was all the way through Turn 2, which was a massive pain in the arse especially when trying to get on the gas for the run down to Stoner Corner...
putting more weight over the front definitely helped. We did not have the time or the stuff to be undertaking front-end rebuilds - so just made do with body positioning
.


putting more weight over the front definitely helped. We did not have the time or the stuff to be undertaking front-end rebuilds - so just made do with body positioning


".....shut the gate on this one Maxie......it's the ducks guts !!............."