Kawasaki Sportsbike Riders Club - Australia - Online Forum

Hi All,
Just replaced bike #45 with a black beauty, 2004/5 ZR750J naked with some mods ie. Staintune, mini flashers (saw flash frequency post) TAG alloy bars, tail tidy bits, rack & bag, rear stand cotton reels. Love it. Looks as new, only done 15,000 ks.
Have owned 2 Kawas previously, Z1000J and KLX 250, remember both fondly but this 750 is something else.
I'm looking for some info. I know it's a naked bike but does anyone know if there is a small screen available for this bike, either OEM or aftermarket? Appreciate any info or comment.
The Tag alloy bars are nice and light but I found they were flatter, wider and a little less swept back than the original item and felt a bit weird, so I have refitted the original bars minus the solid weights in the ends.

vmd wrote:Hi All,
Just replaced bike #45 with a black beauty, 2004/5 ZR750J naked with some mods ie. Staintune, mini flashers (saw flash frequency post) TAG alloy bars, tail tidy bits, rack & bag, rear stand cotton reels. Love it. Looks as new, only done 15,000 ks.
Have owned 2 Kawas previously, Z1000J and KLX 250, remember both fondly but this 750 is something else.
I'm looking for some info. I know it's a naked bike but does anyone know if there is a small screen available for this bike, either OEM or aftermarket? Appreciate any info or comment.
The Tag alloy bars are nice and light but I found they were flatter, wider and a little less swept back than the original item and felt a bit weird, so I have refitted the original bars minus the solid weights in the ends.

Someone will make a screen for it, was actually discussing that with a Z750 riding mate this AM.

The bar end weights are there to reduce the vibes, your hands might go numb if you ride for a long period.

Try these blokes vmd,a mate of mine just bought one for his 750 turbo so they should be able to help
His was $182-00 delivered and was a tinted one
http://www.eaglescreens.com.au/?productcats=kawasaki

Thanks Phil & HB for your posts, I will check out the site right away HB. Phil, I was aware of the possible vibe effect but I found it's still quite smooth up to about 120-130 clicks. I plan to put some bar end knobs/weights on, mainly to hide the current open ends. The solid weights in the standard bars were removed by the previous owner by drilling out the spot weld so to replace I would have to tack weld them at the end but I might look for some other alloy bars. Thanks again.

Thanks to H.B.Bear,
I've ordered a dark tint Touring screen from eaglescreens cost approx $220 delivered.
Will post performance after it's fitted and try to provide some piccies as well.