'06 ZX10 Front end knock/movement

For general Technical and Performance Discussions
Post Reply
User avatar
NewbieZX9
Newbie
Posts: 4
Joined: Mon May 30, 2011 6:12 pm
Bike: ZX10R
State: New South Wales

'06 ZX10 Front end knock/movement

Post by NewbieZX9 »

G'day all, apologies if this has already been a thrashed topic of discussion but I'm only a newbie.

Just bought a 2006 ZX10, thing runs and looks immaculate, however my only concern is at low speed (really only while braking) there feels like slight movement in the wheel, for example when returning home from a ride out, riding up the gutter on the driveway theres a slight bump I can feel through the steering.

My brother in-law has tried to convince me this is just things like the (braided) brake lines, damper or something just tapping against the front end somewhere, but I tend to disagree..

I'm probably somewhat paranoid as I have in the past had to replace the headset bearings amongst other things in an '03 Gixxa I fixed up with a mate, but is this just paranoia or the inevitable?
Cut me and I bleed ... Green.
User avatar
tim
VIP MEMBER
VIP MEMBER
Posts: 5815
Joined: Wed Dec 10, 2008 10:12 pm
Bike: ZX6R
State: New South Wales
Location: Sydney, NSW

Re: '06 ZX10 Front end knock/movement

Post by tim »

Why not try a mechanic man, get them to have a feel.
2008 ZX6R Special Edition
User avatar
MadKaw
Administrator
Administrator
Posts: 9671
Joined: Tue Apr 20, 2004 4:33 pm
Bike: ZX10R
State: New South Wales
Location: Windsor or the Creek..
Contact:

Re: '06 ZX10 Front end knock/movement

Post by MadKaw »

Could be steering head bearings, probly just need adjusting / tightening..
Or could just be the pads moving in the calipers...
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
timmyrocks
KSRC Contributor
KSRC Contributor
Posts: 2145
Joined: Wed Jan 16, 2008 3:45 pm
Bike: Other Kawi
State: New South Wales
Location: Western Sydney

Re: '06 ZX10 Front end knock/movement

Post by timmyrocks »

Yer my guess would be the steering head bearings, hold front brake tight at standstill and try and rock bike back and forward to see if you can feel the same looseness-movement
anyone can go fast in a straight line,,,,

Team Crash "09"

TE310 2011 Husqvarna trail bike :)
WR125 2004 Husqvarna :P
Post Reply