Page 1 of 1
GPZ900R Raise handle bars?
Posted: Sun Apr 25, 2010 11:31 pm
by lauriep
HI
Anyone know if this can be done or if/where the items can be purchased?
Raising the handle bar height on a GPZ900R?
50mm or so from standard.
and what is required to complete, ie do you actually require longer cables, lines?
Thanks
Re: GPZ900R Raise handle bars?
Posted: Mon Apr 26, 2010 4:57 am
by bonester
GTR1000 bars might fit?
Re: GPZ900R Raise handle bars?
Posted: Mon Apr 26, 2010 10:39 am
by P4nza
buy a cruiser?
Re: GPZ900R Raise handle bars?
Posted: Mon Apr 26, 2010 9:27 pm
by Gosling1
bonester wrote:....GTR1000 bars might fit?....
that's probably the best bet.....
and Laurie - yes, you will need longer brake lines for a 50mm lift at the very least. You may find there is enough play in the clutch and throttle cables (not free-play ... up-n-down play) so that these fit the new bars without a problem. I recently changed the bars on my ZX12R from the OEM clip-on style low bars, to a normal Z1000-style top-clamp mounted bar.....and both the clutch and throttle cables fitted up fine.
Re: GPZ900R Raise handle bars?
Posted: Tue Apr 27, 2010 9:54 am
by lauriep
thanks guys for that info.
before I order the new brake lines I will check out these GTR bars.
Re: GPZ900R Raise handle bars?
Posted: Sun Dec 26, 2010 2:19 pm
by letsride
Hi there . How did the GTR handle bars go on the gpz900r. Were there any probs? I want ot raise my bars too . Thanks
Re: GPZ900R Raise handle bars?
Posted: Fri Sep 02, 2011 7:50 pm
by Schnitzel
Have a look on ebay they sell a handelbar conversion kit there