Page 1 of 1
Tyre inflation adaptor
Posted: Tue Sep 15, 2009 10:01 pm
by seiko1
Anybody know where I can get one of those adaptor thingy's so I can use the servo barstage type
air lines
Bloody compressor has shite itself and is ready for the tip

Re: Tyre inflation adaptor
Posted: Tue Sep 15, 2009 10:19 pm
by Jonno
Just get a decent quality gauge, never trust the servo gauges

Re: Tyre inflation adaptor
Posted: Tue Sep 15, 2009 10:30 pm
by seiko1
Jonno wrote:Just get a decent quality gauge, never trust the servo gauges

Pressure aint the problem....it's getting that bastard arse stupid angle nozzle on the valve in the first place

Re: Tyre inflation adaptor
Posted: Tue Sep 15, 2009 10:37 pm
by Jonno
ah that kind of adapter, when you get new tyre fitted ask for them to be put in and pro's/cons etc, they will replace them easy at that stage for a few extra buks

Re: Tyre inflation adaptor
Posted: Tue Sep 15, 2009 10:49 pm
by seiko1
Jonno wrote:ah that kind of adapter, when you get new tyre fitted ask for them to be put in and pro's/cons etc, they will replace them easy at that stage for a few extra buks

Two new tyres thankyou very much.....
You mean the 90 degree valves?
Don't like em because little smart arses can get an easy purchase on em and rippem right orf
Do you know what the bike shops buy the Pilot road 2's for?
Re: Tyre inflation adaptor
Posted: Tue Sep 15, 2009 11:05 pm
by Jonno
I would park the bike where you can easily see it and wack these priks with a big stick

Maybe in front of your work window, at least that might stop that being broken as long as ya dont swing and miss
Bike shops buy everything 95 times cheaper than what you can get it for and all conspire to have same prices, but if you catch them when their servers are down they cant contact the other bike shop you were going to to fix the price
Not really, margins are Farkal.
Usual markup is 10% after their discount and is usually inline with suppliers list price either by agreement or by how much they buy no matter what or where you go unless its old stock, plus or minus local market and competitors factor of about 600% to -%5...haha I dont farkin know

Re: Tyre inflation adaptor
Posted: Tue Sep 15, 2009 11:59 pm
by z900/zx9
If you didnt live in the back waters i would say ring john at high octane motorcyles for tyres 9465 3555 ,tel em mal sent ya.If they got them in stock just orginise a day for a ride to thomastown,then continue on into the hills to scrub them in

Re: Tyre inflation adaptor
Posted: Wed Sep 16, 2009 12:39 pm
by seiko1
Front 120/70.... $149.58 cost
Rear 190/50.... $189.92 cost
Pilot Road 2's
Quoted by a local shop front....$255.00 Rear....$309.00
Bit more than a ten percent markup
