On inspecting the pilot screws one of them seems slightly bent on the tip so i'm guessing it needs replacing.
Heres the good bit,where the hell can I get these from?? Can't locate them anywhere,so I thought I would ask you guys.
HELP
Paul
CVK Carbies
CVK Carbies
Got a problem with the carbs on my 84 gpz900r, it won't idle smoothly so I stripped the carbs down and checked the needles and jets.
On inspecting the pilot screws one of them seems slightly bent on the tip so i'm guessing it needs replacing.
Heres the good bit,where the hell can I get these from?? Can't locate them anywhere,so I thought I would ask you guys.
HELP
Paul
On inspecting the pilot screws one of them seems slightly bent on the tip so i'm guessing it needs replacing.
Heres the good bit,where the hell can I get these from?? Can't locate them anywhere,so I thought I would ask you guys.
HELP
Paul
-
robracer
- VIP MEMBER
- Posts: 15251
- Joined: Thu Feb 24, 2005 8:23 pm
- Bike: ZX6R
- State: New South Wales
- Location: Port Macquarie
Re: CVK Carbies
Try Zedpower, they are in the gong
http://www.zpower.com.au/catalog/index. ... 84_1603_78
or show & Go in SA
http://www.showandgo.com.au/sale/mcsale ... ~mainFrame
http://www.zpower.com.au/catalog/index. ... 84_1603_78
or show & Go in SA
http://www.showandgo.com.au/sale/mcsale ... ~mainFrame
-
Gosling1
- Team Donut
- Posts: 13826
- Joined: Mon Jun 20, 2005 9:30 pm
- Bike: ZX2R
- State: New South Wales
- Location: Anarchy Road
- Contact:
Re: CVK Carbies
Z1 Enterprises in the US should be able to help with these, if you can't source them locally.
".....shut the gate on this one Maxie......it's the ducks guts !!............."