Kawasaki Sportsbike Riders Club - Australia - Online Forum

i've noticed that the FI warning light comes on and stays on while riding my 05 zx6r, i've searched through the service manual and haven't been able to find out what it means?

i've heard it comes on if there's a wiring fault? but i haven't noticed anything amiss with the running of the bike

any ideas?

Do you have a stock exhaust, or an aftermarket jobbie?

I ask because I know when my pit biatch fitted my new exhaust, it also came with a "FI light" fixer, which stopped the light from staying on

Same thing with my 10 new pipe & the light stays on.... could not be bothered fixing it

no it's still got the stock pipe...

the light usually comes on when the cables are disconnected from the stock pipe, when putting on an aftermarket pipe.

I'd whip off the rear panels and have a look at the connection (RHS) If it's not that, fark knows...

slojo wrote:no it's still got the stock pipe...

Have a look at the servo under the seat and make sure the cables are still connected, then check on the butterfly valve on the exhaust too. If both of those are OK I'd take it to a dealer to check the fault code using their magic fault code generator thingamagiggy whatsit.

I had this issue even with the stock pipe, the servo can over rotate and trigger the FI light....nothing an adjustment won't fix

thanks for the quick replies guys!

yeah i just rotated the servo a bit and hey presto! FI light turns off!

slojo wrote:thanks for the quick replies guys!

yeah i just rotated the servo a bit and hey presto! FI light turns off!

Good result

What's the fi warning light?

brendanzxr wrote:What's the fi warning light?

Fuel injection warning light on the new bikes

Ok thanks rob , one day i'll have a fi bike