Page 1 of 1
Grab Rail Fillers
Posted: Sat Dec 29, 2007 10:22 pm
by nicko
Does anyone know if there is some one who makes filler panels for the removal of grab rails on an 01 zx6r?
Re: Grab Rail Fillers
Posted: Sat Dec 29, 2007 10:24 pm
by hoffy
Neo_nick wrote:Does anyone know if there is some one who makes filler panels for the removal of grab rails on an 01 zx6r?
you can buy christmas tree plugs to fit off a stand at your local Supercheap auto..they also have rubber grommets that fit too. Check it out.
On the 12 you have to put normal bolts in place of the grab rails/tie down points, as they hold the rear ducktail on, check yours aint the same..if it is Id just put bolts with big washers in..
Re: Grab Rail Fillers
Posted: Sun Dec 30, 2007 9:54 am
by nicko
hoffy wrote:Neo_nick wrote:Does anyone know if there is some one who makes filler panels for the removal of grab rails on an 01 zx6r?
you can buy christmas tree plugs to fit off a stand at your local Supercheap auto..they also have rubber grommets that fit too. Check it out.
On the 12 you have to put normal bolts in place of the grab rails/tie down points, as they hold the rear ducktail on, check yours aint the same..if it is Id just put bolts with big washers in..
Cheers Hoffy - Its not true what they say mate, you are a good bloke!
Re: Grab Rail Fillers
Posted: Sun Dec 30, 2007 10:08 am
by mick_dundee
Neo_nick wrote:Cheers Hoffy - Its not true what they say mate, you are a good bloke!
Nah it is true you cauht him on an off moment
Re: Grab Rail Fillers
Posted: Sun Dec 30, 2007 10:09 am
by Wattie
mick_dundee wrote:Neo_nick wrote:Cheers Hoffy - Its not true what they say mate, you are a good bloke!
Nah it is true you cauht him on an off moment
nah, i used his login....
Re: Grab Rail Fillers
Posted: Sun Dec 30, 2007 6:22 pm
by Neka79
hoffy wrote:Neo_nick wrote:Does anyone know if there is some one who makes filler panels for the removal of grab rails on an 01 zx6r?
you can buy christmas tree plugs to fit off a stand at your local Supercheap auto..they also have rubber grommets that fit too. Check it out.
On the 12 you have to put normal bolts in place of the grab rails/tie down points, as they hold the rear ducktail on, check yours aint the same..if it is Id just put bolts with big washers in..
i got a feeling the 6 may be the same... Greeny took the rails of his and had 2 big washers under a couple of bolts...
Re: Grab Rail Fillers
Posted: Mon Dec 31, 2007 12:15 am
by nicko
Nah i dont think it holds it on - well the handles bolt to the subframe but dont have any mounting tabs for the duck tail
Ill take them off again and see how flimsy it is without them
Re: Grab Rail Fillers
Posted: Mon Dec 31, 2007 7:26 am
by robracer
Neo_nick wrote:Nah i dont think it holds it on - well the handles bolt to the subframe but dont have any mounting tabs for the duck tail
Ill take them off again and see how flimsy it is without them
Looks like it would have to be bolts then
Re: Grab Rail Fillers
Posted: Thu Jan 17, 2008 12:38 pm
by zxnator
i removed the grab rails from my e mod 9 had the holes pluged and plastic welded came up sweet.
Re: Grab Rail Fillers
Posted: Thu Jan 17, 2008 12:48 pm
by Neka79
zxnator wrote:i removed the grab rails from my e mod 9 had the holes pluged and plastic welded came up sweet.
and sum bastard scribbled on ur arm too!!
wash that off!!
Re: Grab Rail Fillers
Posted: Thu Jan 17, 2008 12:55 pm
by zxnator
Neka79 wrote:zxnator wrote:i removed the grab rails from my e mod 9 had the holes pluged and plastic welded came up sweet.
and sum bastard scribbled on ur arm too!!
wash that off!!
no can do tuff stickers dont was off, LOL