Kawasaki Sportsbike Riders Club - Australia - Online Forum

Hey guys,

Just chasing the width between the front discs on a 05/06 model ZX6R. Either inside to inside is fine, or outside to outside, what ever is easiest to measure. Bonus points if some can measure both the inside to inside and outside to outside for me (I believe the discs are 5.5mm each hence should be 11mm difference total).

cheers,
Kris

no worries, i'll grab the crutches and measure it up in the morning.

It'll give me a chance to survey the damage, haven't looked at it since it went down the road.

Outside to outside: 142mm
Inside to inside: 131mm

Wes can confirm...

measurements confirmed

Thanks guys, just what I needed.
Now to go measure what the ZX9R ones are...

Got another question for ya fellas if you dont mind.

Need to know the fork length from the top of the fork (just the top of the outer tube not the very top) to the centre of the axle.

Also if anyone knows the axle diameter off the top of their head that would be a massive help!

And while Im at it, does anyone know what size steering head bearings they take? Have googled a fair bit but havent found the info unfortunately.

thanks heaps!