Carbon fibre GB. CASHOLA TIME! CHECK PM & THREAD

up2nogood · Post by **up2nogood** » Thu Aug 11, 2005 1:46 pm

Just checking! If they list it, you can have it!

Just for those that may have assumed they make everything and didn't bother to check!

NinjaMoses · Post by **NinjaMoses** » Thu Aug 11, 2005 1:47 pm

up2nogood wrote:Quick update:
ZX model motorcycles with the swingarm bracing (current) can't fit a hugger that GCC has made.

Might include the later 6's.

From what I can gather ZX9R 98 - 01 models are fine. 02 and later models have the bracing which means no hugger for you!

rolders · Post by **rolders** » Thu Aug 11, 2005 5:11 pm

up2nogood wrote:Quick update:
ZX model motorcycles with the swingarm bracing (current) can't fit a hugger that GCC has made.

Might include the later 6's.

you are having a laugh!

up2nogood · Post by **up2nogood** » Thu Aug 11, 2005 6:12 pm

Just make sure you check they list it!

And check if you have confirmed, see P4 of this thread. Confirmed in bold.

NinjaMoses · Post by **NinjaMoses** » Fri Aug 12, 2005 11:51 am

Hey dude,

Just PM'd ya my final order.

Here is my total order just for you to match against. Please let me know if your list matches mine

1998 ZX9R: Rear Hugger $270, Front Guard $220, Belly Pan $300 (All in Carbon finish)
Hayabusa: Large Tank Protector $110 (In Silver finish)
CBR250RR: Hugger $200 & Triple Clamp Cover $30 x 2 ($60) (All in Carbon finish)
1993 Early CBR900 Triple Clamp Cover $30 (In Carbon finish)
2003 Honda CBR600 F4i Rear Hugger (In Carbon finish)
2004 Z1000 Tank protector (In Red finish)
ZXR750 J Model Tank Protector (In Carbon finish)

Cheers,
Kris

up2nogood · Post by **up2nogood** » Fri Aug 12, 2005 12:41 pm

Kris, all your stuff is noted.

Everyone else, check the list on page 4 of this thread.

Where no colour is indicated, the part will be in carbon finish.

Not a bad turnout, really. And everyone who said they wanted has confirmed.

Next step will be dollar collection. I will use my paypal account for the overseas folks, others could transfer to my bank.

Now, as I am only new here, and haven't physically met any of you I would prefer to give everyone piece of mind when it comes to handling your hard earned cash.
I have spoken to Jason - aardvark- and have let him know I will leave him with my contact details and a disclaimer that all funds received from members will only be used in the manner they specify. Ie; the group buy. Jonno -Scotty37- will be cruising down to Nerang with the dough to make the buy, once I've collected all funds from you guys. He's OK to do the same.

Of course, there is more than just a small element of trust involved here and if anyone is feeling shaky, let me know. You don't have to go through with this if you are concerned.

I don't know if people accept this anymore, but I give you my word that your money will go to Geelong Carbon Craft and you will get your parts. I have never broken my word.

I will post banking deatils once Jason has posted on this thread to say he has our contact details and a signed copy of the 'funds use disclaimer' from myself and Jonno.

up2nogood · Post by **up2nogood** » Fri Aug 12, 2005 1:06 pm

This is the PM I have sent to Jason (aardvark) so he has all my contact details. Scotty37 is cool with sending the same. Jason will post when he has received both our PM's to say we're good guys! I have removed my address from this to protect my fragile innocence.......

I will collect all the funds required for the purchase. When all funds are held, I will transfer the dosh to Jonno (Scotty37) so he can make a dash to Nerang and pay Phil (Geelong Carbon Craft).

Shortly after that, we will have our new toys! Scotty37 will be first, lucky bugger.....

See below for the gist of it:

I, Alex XXXXXXX of XXXXXXX NSW, hereby state that all the funds collected by me, from members of the Kawasaki Sportsbike Riders Club, shall be used only to purchase parts from Geelong Carbon Craft as specified by those members and as listed on page 4 of the group buy thread on the http://www.ksrc-au.com.au forum.
There will be no funds collected over and above that required to make good the purchase of these parts from Geelon Carbon Craft and to ensure that these parts will be safely delivered to the members of the Kawasaki Sportsbike Riders Club forum that have ordered them.
I hereby acknowledge that the retention of these funds by me is theft and that I am liable for both civil and criminal prosecution should these funds not be used to purchase the parts previously listed and as specified by those members who have transferred funds to me.
Home: 02 XXXXXXXX
Fax: 02 XXXXXXXX
Mob: XXXXXXXXXX
DL: XXXXXX

Jonno · Post by **Jonno** » Fri Aug 12, 2005 3:21 pm

Yes Alex, I have done the same and sent Jason my details just as you did.
I also give my word that all will be on the up n up.

Jonno

aardvark · Post by **aardvark** » Sat Aug 13, 2005 9:30 pm

OK, I just thought I'd let everyone know I have recieved PM's from Alex and Jonno and I have confirmed their identities through work. Actually, I'm kidding about the confirmation bit... (did someone say IIB???)

If this all goes pear shaped, let me know.

I wonder if they would have asked me to be the gate keeper had I been a Victorian or NSW copper? heheh

up2nogood · Post by **up2nogood** » Sat Aug 13, 2005 10:07 pm

If you were a NSW copper you would have demanded that you receive all the cash!

up2nogood · Post by **up2nogood** » Sat Aug 13, 2005 10:19 pm

Now, can all involved let me know who will receive the main shipment in:

VIC

WA

Then I can work out freight. Then I'll hit you all up for the right amount of money.
NSW shipment will come to me in Shitney.
Scotty37 is our only Qld member in and he can pick up while dropping off the coin.
UK deliveries are going to either end of the country, so I'll have to do two.

I need to know if any of the deliveries are too far away from each other to make one delivery possible. Work it out amongst yourselves before replying to me.

Whew, nearly there!

Gosling1 · Post by **Gosling1** » Sat Aug 13, 2005 10:29 pm

Alex, you are doing a superb job. When this GB is finished, I think the entire membership owes you a round of applause, and a huge piss-up

cheers
SoonToBeHuggedDave

Jonno · Post by **Jonno** » Sun Aug 14, 2005 12:46 pm

Good going Alex, this is huge already. Glad it is you doing all the leg work, I just have to do the dash with the cash to GCC and stopping for no one

Can't wait

Oh and I gets the first ugger too.. hehehe..oops sorry. Prolly screw it on in the car park

NinjaMoses · Post by **NinjaMoses** » Sun Aug 14, 2005 10:05 pm

Sorry for the slow reply dude, have been away all weekend. I will taking the delivery for WA, since really there is only me & stoneville who have ordered. I will PM ya my details shortly.

up2nogood · Post by **up2nogood** » Mon Aug 15, 2005 7:45 am

Can everyone check I've got it right and let me know the month and year of manufacture of their bike, just so we don't get the wrong bits.
Alrighty, here is everyone:

VICTORIANS
TheKid: 2001 ZX9Hugger $270 & front guard $220.
Blue12: 03/05 ZX12 Hugger $270
Smek: 1999 ZX6 G2 Hugger $270
DELIVER TO SMEK, ADDRESS HELD.

WEST AUSTRALIANS:
NinjaMoses: 1998 ZX9 Hugger $270, front guard $220, belly pan $300.
Hayabugly large tank protector $110 (silver)
1999 CBR250RR hugger $200 & triple clamp cover $30 x 2 ($60)
CBR900 1993 triple clamp cover $30
Honda CBR 600-f4i 2003 hugger $270
Z1000 tank ptotector (red) $(60)
ZXR750J tank protector $70
Stonneville: 2005 ZX6 Hugger $270
DELIVER TO NINJA MOSES, ADDRESS HELD.

ACTIANS (?):
Gosling1: 2005 ZX12 Hugger $270

QLDERS:
Scotty37: 9/04 ZX12 Hugger $270,

NSWELSHMEN:
Up2nogood: 5/05 ZX12 Hugger $270
Nick: 12/04 ZX636 Hugger $270.
DELIVERY TO UP2NOGOOD.

DENIZENS OF THE UNITED KINGDOM:
Rolders: ZX636 C1 Carbon Hugger $270, Blue hugger $270, tank protector carbon $60, tank protector blue $60
FREIGHT: $74.50
ADDRESS HELD