Posted: Thu Mar 23, 2006 2:59 pm
That's cool. Can we get him the logo and the writing seperate?
hmmm I can't but someone else may have the software to do that...
anyone.??
Kawasaki Sportsbike Riders Club - Australia - Online Forum
Australian Kawasaki Sportsbike Riders Discussion Forum - All Welcome, free and easy to join, just click "register" below - www.ksrc-au.com
https://www.ksrc-au.com/phpBB3/
I Waz Framed - Personalised Number Plate Frames
Page 3 of 3
Posted: Thu Mar 23, 2006 3:02 pm
Posted: Fri Mar 24, 2006 12:47 am
The question begs tho, do the number plate surrounds come in different sizes, SA plate surrounds are a different size to VIC plate surrounds, the Ulysses Club had to have different sizes made to suit, you'll have to look into that too.
Les
Les
Posted: Fri Mar 24, 2006 5:03 am
Great Idea I thinkMadKaw wrote:I think they'd want to run a typical plate for a bulk run.
I'd say
http://www.ksrc-au.com (at the top)
"Logo" Kawasaki Sportsbike Riders Club (at the bottom)
Posted: Fri Mar 24, 2006 5:32 am
sounds good, i would be keen to get one if we do an order....
Posted: Fri Mar 24, 2006 8:38 am
sounds good to me too
Posted: Sat Mar 25, 2006 8:29 am
Here's my attempt at separating logo and rider
Posted: Wed Apr 26, 2006 2:19 pm
got my frame today.. they just sent me an invoice and had to just do a paypal or direct deposit to acct.. 
Wonder how many people pay??
Wonder how many people pay??Posted: Wed Apr 26, 2006 7:42 pm
Ive edited them slightly, but this is my work.
Logo together.
Logo text, size matching.
Logo no text.
Logo text larger.
Can scale the rider logo bigger if required/interested as well, that'll take a bit more time. I'd assume a higher resolution image would print better onto them.
Logo together.
Logo text, size matching.
Logo no text.
Logo text larger.
Can scale the rider logo bigger if required/interested as well, that'll take a bit more time. I'd assume a higher resolution image would print better onto them.
Posted: Wed Apr 26, 2006 9:17 pm
Sorry double post but Ive just been messing around with it.
For the plate frames it might be better (in my opinion) to edit the logo.
Placing a dark rider on a dark background even with a white outline looks a bit goofy. So the logo cant go on dead as it is.
Also the size of the text could be a problem for printing, I scaled the logo to match the size of the demo plate and if its even only partially an accurate simulation the "Sportsbike Riders Club" wont be legibile.
If you place the text elsewhere (thus being able to make it larger then you would by using the standard logo) it's not as much of a problem.
So what I'd suggest is first is print a white layer onto the bottom of the frame, then print the image of the rider and finally print the text.
Something simillar like what Ive done, just my opinion anyway.
Edit: rehosted image. + Fixed text.
Just an alternative to the triangle edges.
For the plate frames it might be better (in my opinion) to edit the logo.
Placing a dark rider on a dark background even with a white outline looks a bit goofy. So the logo cant go on dead as it is.
Also the size of the text could be a problem for printing, I scaled the logo to match the size of the demo plate and if its even only partially an accurate simulation the "Sportsbike Riders Club" wont be legibile.
If you place the text elsewhere (thus being able to make it larger then you would by using the standard logo) it's not as much of a problem.
So what I'd suggest is first is print a white layer onto the bottom of the frame, then print the image of the rider and finally print the text.
Something simillar like what Ive done, just my opinion anyway.
Edit: rehosted image. + Fixed text.
Just an alternative to the triangle edges.
Posted: Thu Apr 27, 2006 7:47 am
Looks good. I'd suggest we change the black rider and text outline to white so the background can remain black.. Thats what we have done with the t-shirts..
Dunno if they can use it, I'll see what Glen says, as its his baby..
Dunno if they can use it, I'll see what Glen says, as its his baby..
Posted: Thu Apr 27, 2006 8:06 am
Looks good.
I'll shoot it off to Scott and see what he reckons
I'll shoot it off to Scott and see what he reckons
Posted: Thu Apr 27, 2006 8:20 am
This is with a white outline of text and rider.
If you speak to your contact would you be able to ask whats the optimal resolution they want to use to print onto the frames?
Cause I can scale that stuff to any size they need, also the text can be made into a transperant image, so even if they dont have the font to print I can send an image of the text on a transperant background.
To do what I just posted they'd need to print the image of the rider with the white outline over the frame and then the text image over that I think.
Edit.
Black text outline
No text outline
If you speak to your contact would you be able to ask whats the optimal resolution they want to use to print onto the frames?
Cause I can scale that stuff to any size they need, also the text can be made into a transperant image, so even if they dont have the font to print I can send an image of the text on a transperant background.
To do what I just posted they'd need to print the image of the rider with the white outline over the frame and then the text image over that I think.
Edit.
Black text outline
No text outline