Page 3 of 3
Re: ZX10R Akrapovic Slip On
Posted: Mon Sep 17, 2012 12:21 pm
by zxsixr03
Yeah did it all at the same time as the link pipe & PCV, i bought the Graves block off plates which say to leave the reeds under the plate but other brands say to remove the lot, so might re try with out the reeds when i strip the bike.
Re: ZX10R Akrapovic Slip On
Posted: Mon Sep 17, 2012 1:03 pm
by Wattie
It wasn't the Pcv that fixed the backfiring
Re: ZX10R Akrapovic Slip On
Posted: Mon Sep 17, 2012 1:28 pm
by zxsixr03
Nope, pretty sure its air breaking the seal on the block off plates still....
Re: ZX10R Akrapovic Slip On
Posted: Mon Sep 17, 2012 1:50 pm
by Wattie
Oh bugger.
I always just block the hoses off. None of these fancy plates.
Re: ZX10R Akrapovic Slip On
Posted: Mon Sep 17, 2012 2:52 pm
by zxsixr03
Half way down on here after the rear sets install, how did u block off the pair valves?
http://www.untamedvelocity.com/2011%20Z ... 0build.htm
Re: ZX10R Akrapovic Slip On
Posted: Mon Sep 17, 2012 3:18 pm
by Wattie
Just block the hose coming from the air box. All the hoses stay in place and no air gets through.