Kawasaki Sportsbike Riders Club - Australia - Online Forum

Mines here too
V nice.....

Thanking all involved

Just ordered

Hey guys should the spigot on the front stand be a neat fit in the neck of the bike? I reckon it should as obviousely it is part of the lever so to speak. The biggest spigot is to small for the 7 if that is the case as the freeplay allows the stand to touch the fairing prior to lifting the bike. No big deal I'm just going to make a sleeve for it so it fits snug, but as I havn't used these before thought I'd ask the question incase I'm mucking it up. Bikes allways look better on race stands - cool.
Paul.

i have seen that on some bike u need to put some padding around the stand so it doesnt touch the fairings

fat460 wrote:Hey guys should the spigot on the front stand be a neat fit in the neck of the bike? I reckon it should as obviousely it is part of the lever so to speak. The biggest spigot is to small for the 7 if that is the case as the freeplay allows the stand to touch the fairing prior to lifting the bike. No big deal I'm just going to make a sleeve for it so it fits snug, but as I havn't used these before thought I'd ask the question incase I'm mucking it up. Bikes allways look better on race stands - cool.
Paul.

Bummer I have a ZX7 & will not be getting one if it dosen't fit.
Anyone know the hole dia. on a ZX7?

I'll let you know what size it ends up being. Its no big deal, I'll just sleeve the spigot and she'll be right. I still consider these stands to be a bargain versus what else is available and the quality is excellent.
Paul.

Ex Zacahary

Well I only ordered last Thursday and my stand + other bits turned up just now, so I'm very happy with the speed of the deal. Front stand looks to be very heavy duty, about to try it now

Greenblood wrote:
Bummer I have a ZX7 & will not be getting one if it dosen't fit.
Anyone know the hole dia. on a ZX7?

the hole diameter is bigger than the biggest spigot

can these spigots be bought seperately to fit the 7

We received our nice red headstand, looks good.

Now - how do you use it?

The top part swings back and forth, so I'm a bit hesitant to try it without proper instructions - it looks like the bike will just roll backwards or forwards. Is it only supposed to be used in conjunction with a rear stands? Can anyone give nice, detailed instructions, preferably with pics?

Also, on both the Z750 and the Z1000, the hole under the headstock is quite large - seems to be double the diametre of the largest spigot. Will this cause problems?

Jeff

Uh oh, after these posts I had a look and yep 7's are way too big eh?
Comes from having that hole for the adjustable headstock on the RR...

Yes you will have to sleeve them up to fit (unless a bigger is avail?)
IT will be pretty risky and costly to have a sloppy fit...

Also I know we are ozzies and dont read instructions, but in this case they were fairly explicit in how to use....

this is mine now that it is all together.

it may take bit of a sicence lesson to explain how it doesn't fall down in a heap, but remember one thing; MAKE SURE THE REAR END IS PROPERLY SUPPORTED (sorry about the caps & colour )

frogzx12r wrote: Also I know we are ozzies and dont read instructions, but in this case they were fairly explicit in how to use....

ermmmm....no instructions came with it Frog, but thanks anyway
Thanks for the pic Mitch. we'll see how we go!

i got no instructions with mine either, but had no trouble seeing i had used them before

Mitch wrote:i got no instructions with mine either, but had no trouble seeing i had used them before

well i dont think its rocket science