More rain = More mods - zx6r - continued..

[Glen]

The beast lives! That thing is a weapon.

Is the damper the same as gumby?

Yeh I think it is... Hardly changes from full off to full on...

Do you want a Hyperpro CSC. I have one, you'll just need the mounting kit

[MadKaw]

The beast lives! That thing is a weapon.

Is the damper the same as gumby?

Yeh I think it is... Hardly changes from full off to full on...

Do you want a Hyperpro CSC. I have one, you'll just need the mounting kit

Interesting, the mounting kit should just be a clamp... Wonder where to get that from.. I'll look into it.

Was this from your crim, do you have the clamp.?

edit.. The crim clamp doesn't work as it mounts under the damper unit - needs one like this..
http://www.moorespeedracing.co.uk/kawas ... amper.html

[Frank]

I hope you really fixed that rattle gun 'cause removing the front sprocket on a 09 ZX6R is an 'experience' hahaha I seriously had 3 different mechanics have a go and even the 3rd one struggled to remove it. Thankfully he had a more than overkill setup...

Yeah I have seen a truck sized rattle gun take it off easily, and can probably get my hands on one, just need an air compressor big enough to run it

I'll bring the impact sockets over on the weekend.

[Wattie]

Yeh I think it is... Hardly changes from full off to full on...

Do you want a Hyperpro CSC. I have one, you'll just need the mounting kit

Interesting, the mounting kit should just be a clamp... Wonder where to get that from.. I'll look into it.

Was this from your crim, do you have the clamp.?

edit.. The crim clamp doesn't work as it mounts under the damper unit - needs one like this..
http://www.moorespeedracing.co.uk/kawas ... amper.html

I'll swap you the damper off gumby.
Its been done by zeno

[Glen]

Yep it's the one off the crim. Still has the mounting kit

[Jonnymac]

Yep good luck with the front sprocket......

Didn't know the cat was in the headers I may need to look into that on mine. Is there a way of telling without removing the headers?

[MadKaw]

Yep good luck with the front sprocket......

Didn't know the cat was in the headers I may need to look into that on mine. Is there a way of telling without removing the headers?

You can see it if take the muffler and link pipe off..

[Jonnymac]

Cheers Dave I'll have a look. There's gotta be at least 0.2seconds a lap in that mod....

[EDU]

Are we going to see pics of this said ZX6R anytime soon btw?

[MadKaw]

Are we going to see pics of this said ZX6R anytime soon btw?

I posted a pic here the other week.... its the 2nd pic down the page - not the first one..

http://www.ksrc-au.com/phpBB3/viewtopic.php?f=8&t=45102

[EDU]

Oh that is nice! When does it get a set of racing farings?

If you're on a modding mood, maybe chuck a set of braided lines on it... **being an '09 I'm sure the rubber will be getting a bit soft by now and that is a major safety issue**


**use this to sell the idea to your better half should there be any resistance ahaha

[MadKaw]

Oh that is nice! When does it get a set of racing farings?

If you're on a modding mood, maybe chuck a set of braided lines on it... **being an '09 I'm sure the rubber will be getting a bit soft by now and that is a major safety issue**


**use this to sell the idea to your better half should there be any resistance ahaha

Yeh, was thinking about lines, but those Nissins feel pretty good so far.

Its got a set of Diablo Rosso 2's on it that have only done less than 1000ks (of what appears to be upright city riding). They seem ok for the short trips I've done so far.
I'm a bit out of touch with road tyres so not sure if there any good or not, or will suit the track..?

Race fairings..??? I'll never say never..

[EDU]

Never rode on Rossos... they came on my bike as well but I ditched them for slicks before getting to the track

[Blurr]

Rosso's are fine for the road but wouldn't push them on the track.

[Blurr]

Oh and yep, cat has to go. I have the right rattle gun if needed.