Page 2 of 2
Re: 34mm socket wanted to borrow
Posted: Mon Nov 15, 2010 9:40 pm
by Wattie
Will the socket get it?
Is there not too much thread sticking out the bottom.
I use stilsons normally.
I have a spanner that's 30mm and 36mm but that's for head stem nuts and front wheel nut on gumby
Re: 34mm socket wanted to borrow
Posted: Tue Nov 16, 2010 4:07 am
by robracer
Its a 100mm long socket Wattie so it should fit
You have seen part of the collection before....2 1/2 inch spanner
Re: 34mm socket wanted to borrow
Posted: Thu Nov 18, 2010 4:54 pm
by h.b.bear
calling through tamworth i have one in the shed
Re: 34mm socket wanted to borrow
Posted: Thu Nov 18, 2010 4:55 pm
by h.b.bear
calling through tamworth i have one in the shed
Re: 34mm socket wanted to borrow
Posted: Thu Nov 18, 2010 6:34 pm
by robracer
Jobs done, only took a 2mtr long fark off piece of waterpipe
Re: 34mm socket wanted to borrow
Posted: Thu Nov 18, 2010 8:16 pm
by MrWasabi
It's called the attitude adjuster
