Australian Kawasaki Sportsbike Riders Discussion Forum - All Welcome, free and easy to join, just click "register" below - www.ksrc-au.com
https://www.ksrc-au.com/phpBB3/
Get yourself a lightweight battery 4 cell i.e http://www.carbon-imports.com.au/produc ... cts_id=465Blurr wrote:I wanna do this just because I need the farking room.
This is what I have ATM. No room anywhere else
robracer wrote:with the micron & 2 Bros slip on they supplied piece a of alloy to bolt on the top of the servo......all the new cam does is stop on the housing as if there was tension on the cam from the cables...... like I said.... the old ones where like that.fireyrob wrote:hmmm hasnt happened yet but that doesnt mean it wont... wait n see I guess.
Good to meet you too mateEDU wrote:Just to clarify as my English seem to have confused yet another aussie!
What happened was that a friend removed his exhaust and left the cables and servo and after a couple of months the servo jammed and threw a code. He even mentioned something about the bike going into limp mode but I have no idea if that happened or not.
Yeah same with zthou, remove cables carefully without moving cam and it still thinks its working..So no fi lightfireyrob wrote:Good to meet you too mateEDU wrote:Just to clarify as my English seem to have confused yet another aussie!
What happened was that a friend removed his exhaust and left the cables and servo and after a couple of months the servo jammed and threw a code. He even mentioned something about the bike going into limp mode but I have no idea if that happened or not.
Ar yes leaving the cables connected will do that! If the cables are removed carefully ensuring the servo doesnt turn then like I said on both bikes I havent had an issue yet. Its 12 months so here's hoping
