Kawasaki Sportsbike Riders Club - Australia - Online Forum

in relation to making sure they DONT paint the disk surfaces, that is totally correct and id remove all paint/powder coat as the thickness of this will cause you disc to be offcentre and also it cannot be done 100% even so it could cause run out of your disc

We have a heatproof tape that can handle the temprature it costs about $40 a roll don't use masking tape if you're having things powdercoated its a right pain in the arse to remove it when its been cooked on!

roastdinajima wrote: don't use masking tape if you're having things powdercoated its a right pain in the arse to remove it when its been cooked on!

found that out the hard way once... every sleeve end & bolt hole on a frame, spent hours with a razor blade cleaning up the mess

two pac and with polished edge $220 a rim here in the west. rims were soda blasted first. the rims were handed over bare.