Posted: Mon May 22, 2006 10:49 pm
me too.
Paul.
Paul.
will message him tonight!
shit i have 342 new posts to go thru - might take a while
Kawasaki Sportsbike Riders Club - Australia - Online Forum
Australian Kawasaki Sportsbike Riders Discussion Forum - All Welcome, free and easy to join, just click "register" below - www.ksrc-au.com
https://www.ksrc-au.com/phpBB3/
Front Headstock Stand Group Buy
Page 10 of 12
Posted: Wed May 24, 2006 1:50 pm
yo have been offline for a couple of weeks - workin 2 hard
will message him tonight!
shit i have 342 new posts to go thru - might take a while
will message him tonight!
shit i have 342 new posts to go thru - might take a while
Posted: Thu May 25, 2006 11:22 am
heres the reply - looks like where getting close!
Hi Pat,
Just a quick note to say we are sorting out our new stock (incl. head
lifting stands)over the next few days, taking pictures, pricing, write ups,
etc..
We'll write to you tonight, by then we'll have some if not all of it done.
Cheers,
Pete & Joy
ps. If we looking at your KSRC site where do we go to see what you
advertised for us? Or, do we need to become members? Thanks
Hi Pat,
Just a quick note to say we are sorting out our new stock (incl. head
lifting stands)over the next few days, taking pictures, pricing, write ups,
etc..
We'll write to you tonight, by then we'll have some if not all of it done.
Cheers,
Pete & Joy
ps. If we looking at your KSRC site where do we go to see what you
advertised for us? Or, do we need to become members? Thanks
Posted: Thu May 25, 2006 5:24 pm
should be good
bike stand
Posted: Thu May 25, 2006 8:43 pm
already got both front and back not interested thanks
Posted: Fri May 26, 2006 6:40 pm
Hi Pat,
We now have all head lifting stands listed on our ebay site. You and your
members can have a look at them there as well as here are some pictures that
you might want to post on your site.
The pricing as you can see is starting at $159 on ebay with a buy it now
price of $189. RRP on these stands is $210.
There are no aluminium head lifters as their cost was extremely high.
Same as last time, if you can entice 10 or more of you members to buy any of
the head lifters, KSRC's price will be $145 + postage ($10 NSW & $15 other
States) As before, all orders would be placed directly to us. Please advise
members that payments are to be made by direct deposit only and on
contacting us please let us know that they are KSRC members.
We'd like to compliment you and your members on the caliber of your forum.
It has left a good taste in our mouth each time we had dealings with a
member of the "green team".
Cheers,
Joy and Pete
i had forgotten about the spigot sizes but will email them back now and put up pics within hour
We now have all head lifting stands listed on our ebay site. You and your
members can have a look at them there as well as here are some pictures that
you might want to post on your site.
The pricing as you can see is starting at $159 on ebay with a buy it now
price of $189. RRP on these stands is $210.
There are no aluminium head lifters as their cost was extremely high.
Same as last time, if you can entice 10 or more of you members to buy any of
the head lifters, KSRC's price will be $145 + postage ($10 NSW & $15 other
States) As before, all orders would be placed directly to us. Please advise
members that payments are to be made by direct deposit only and on
contacting us please let us know that they are KSRC members.
We'd like to compliment you and your members on the caliber of your forum.
It has left a good taste in our mouth each time we had dealings with a
member of the "green team".
Cheers,
Joy and Pete
i had forgotten about the spigot sizes but will email them back now and put up pics within hour
Posted: Fri May 26, 2006 6:59 pm
yo here they are
Posted: Fri May 26, 2006 7:01 pm
what holds the stand upright at the folding joint?
Posted: Fri May 26, 2006 7:07 pm
each stand comes with 13, 15, 16.5, 17, & 18mm spigots
Posted: Fri May 26, 2006 7:23 pm
ha just noticed email
my members
my forum
hahaha
everyone here is 2 high maintenance for me
my members
my forum
hahaha
everyone here is 2 high maintenance for me
Posted: Sat May 27, 2006 5:57 am
gizmo - here is the response
A tube created in both the lower and the upper component and a shaft with a "safety pin" holds the two together and upright after you put the pin in it's place. From then on you just push downwards until the head lifted to
it's maximum height.
A tube created in both the lower and the upper component and a shaft with a "safety pin" holds the two together and upright after you put the pin in it's place. From then on you just push downwards until the head lifted to
it's maximum height.
Posted: Sat May 27, 2006 7:38 am
What's this talk about "members" and "taste in my mouth"ozx6r wrote:ha just noticed email
my members
my forum
hahaha
everyone here is 2 high maintenance for me
WTF have you been doing to get these deals ????
Posted: Sat May 27, 2006 11:08 am
We'll be placing an order for a front headlift stand. Reading the post from the sellers, is it correct that we order directly through them, or do we post interest here and then the bulk amount is ordered through the site?
Posted: Sat May 27, 2006 11:20 am
What was our Bulk price?
Posted: Sat May 27, 2006 12:53 pm
as abovegizmo wrote:What was our Bulk price?
and yes esie once get get 10 people to commit we will send them a list and everyone can pay...