Re: Going racing again! another Bike Build
Posted: Mon Mar 25, 2013 6:07 pm
i think the terminology is 32, un-bridled, tyre frying, terrifying, horsepower. 
Kawasaki Sportsbike Riders Club - Australia - Online Forum
Australian Kawasaki Sportsbike Riders Discussion Forum - All Welcome, free and easy to join, just click "register" below - www.ksrc-au.com
https://www.ksrc-au.com/phpBB3/
Going racing again! another Bike Build
Page 10 of 14
Re: Going racing again! another Bike Build
Posted: Mon Mar 25, 2013 6:14 pm
That sounds very tidy.!!
Re: Going racing again! another Bike Build
Posted: Mon Mar 25, 2013 7:25 pm
Sounds pretty sweet Rob 
Re: Going racing again! another Bike Build
Posted: Mon Mar 25, 2013 8:38 pm
great job on this build mate, bike looks sweet as
Re: Going racing again! another Bike Build
Posted: Mon Mar 25, 2013 11:07 pm
well done 
Re: Going racing again! another Bike Build
Posted: Tue Mar 26, 2013 7:58 am
Nice Rob
Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 12:16 pm
So much for possible ground clearance issues, could fit a bus under there
Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 7:09 pm
you have a lot of room to play with in terms of ride heights or dropping the forks through a bit 
Heh what did they say to you about a bellypan/catchtank ?? No issues with your bike not having one ?
Heh what did they say to you about a bellypan/catchtank ?? No issues with your bike not having one ?
Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 7:14 pm
Zero Issues Gos, I have jacked up the rear end with longer shocks & had no problems with turn in so I will leave the forks as is, I was more concerned with the pipe clearance, the rearsets are real high which helps 
Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 7:21 pm
cool OK thank mate, I was a bit worried about having to fit one to the 250/3
more worried about the brakes on the baby triple at the moment
a test ride next week will be interesting
more worried about the brakes on the baby triple at the moment
a test ride next week will be interesting Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 8:14 pm
Brakes on the 350F are non existant, stainless disk is shite
Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 8:16 pm
was just about to ask that... 'cause the ones on the 500F are pretty scary too! Are you even allowed to run dual discs or something?
Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 8:31 pm
yeh those OEM period discs are shitful, and the calipers are pretty crook as well. You could change to an RD front end - awesome discs & calipersrobracer wrote:....Brakes on the 350F are non existant, stainless disk is shite.....
but the drum brakes on the S1 ??? FMD I better make sure the rear brake is good, that is where all the braking will be done.....
Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 8:42 pm
I put twin discs on mine back in the day. The brakes were better, but I can say the pads lasted like for-evah...
(-&
(-&
Re: Going racing again! another Bike Build
Posted: Thu Apr 11, 2013 8:50 pm
What calliper are you running on it?robracer wrote:Brakes on the 350F are non existant, stainless disk is shite