Hi all,
On a ride on the weekend the 08 zx6r was cutting out/down on power when:
under load, and
hot, and
into the higher rev range (started loss at around 8k, dead above 10k)
Does happily rev in neutral.
Thinking to first clean the fuel pump/pickup filter.
Next replace plugs (hasn't been done in years)
Clean injectors?
Throttle bodies?
PC3 getting hot and failing?
Any thoughts?
Cheers,
Tim.
Power cutting at higher rev range
- tim
- VIP MEMBER
- Posts: 5815
- Joined: Wed Dec 10, 2008 10:12 pm
- Bike: ZX6R
- State: New South Wales
- Location: Sydney, NSW
Power cutting at higher rev range
2008 ZX6R Special Edition
- MadKaw
- Administrator
- Posts: 9671
- Joined: Tue Apr 20, 2004 4:33 pm
- Bike: ZX10R
- State: New South Wales
- Location: Windsor or the Creek..
- Contact:
Re: Power cutting at higher rev range
Yep, all the above..
Sounds like a fuel blockage or pump issue.
Maybe try a different map on the PC or remove it see if that is an issue.
Sounds like a fuel blockage or pump issue.
Maybe try a different map on the PC or remove it see if that is an issue.
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.

I ride way too fast to worry about cholesterol
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.

I ride way too fast to worry about cholesterol
- KiwiMat
- KSRC Member
- Posts: 197
- Joined: Sun Jun 03, 2012 8:50 pm
- Bike: ZX12R
- State: New South Wales
- Location: Sydney
Re: Power cutting at higher rev range
also...
cant hurt and cheap as, to run some decent injector cleaner through the bike, but i had exactly the same prob on a recent GSXR600 i fixed up, put a $120 fuel pump kit through it, went hard after that, i still reakon the injector cleaner helped.
Pinched or bend fuel line that bends more when hot?
just throwing a few out there.
cheers
KiwiMat
cant hurt and cheap as, to run some decent injector cleaner through the bike, but i had exactly the same prob on a recent GSXR600 i fixed up, put a $120 fuel pump kit through it, went hard after that, i still reakon the injector cleaner helped.
Pinched or bend fuel line that bends more when hot?
just throwing a few out there.
cheers
KiwiMat
ZX12R - 2005
GSXR750 - 2022
FZR250 - 1990
ZXR250A... project
GSXR750 - 2022
FZR250 - 1990
ZXR250A... project
- tim
- VIP MEMBER
- Posts: 5815
- Joined: Wed Dec 10, 2008 10:12 pm
- Bike: ZX6R
- State: New South Wales
- Location: Sydney, NSW
Re: Power cutting at higher rev range
Thanks guys! Haven't got back to it yet, but yeah fuel line is a possibility (I did have the tank up refitting some parts) and will try some injector cleaner.
I did a fuel pump kit 2 years ago - this one
https://www.ebay.com.au/itm/154365836327
not sure on the quality.
Will update
Cheers
I did a fuel pump kit 2 years ago - this one
https://www.ebay.com.au/itm/154365836327
not sure on the quality.
Will update
Cheers
2008 ZX6R Special Edition
- James
- VIP MEMBER
- Posts: 337
- Joined: Fri May 28, 2004 8:48 am
- Bike: Other Kawi
- State: New South Wales
- Location: Sydney
Re: Power cutting at higher rev range
I had the same issue on a ZX7 that was due to the battery. I replaced it and all good!
- Wattie
- VIP MEMBER
- Posts: 10041
- Joined: Mon Oct 31, 2005 12:23 pm
- Bike: ZX10R
- State: New South Wales
- Location: Bligh Park
Re: Power cutting at higher rev range
yep, or even check the terminals are tight.James wrote:I had the same issue on a ZX7 that was due to the battery. I replaced it and all good!

Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message