Let The Mod Begin

[Blurr]

pffft......My 45hp KLX will puch above it's weight.

Something about "knowing where all the horse's are in the padock" a wise man once told me

[Phil]

pffft......My 45hp KLX will puch above it's weight.

Something about "knowing where all the horse's are in the padock" a wise man once told me

Good call I've got gold bits that assist counting and name retention as well

[Damon Z1000]

So whadya reckon Davo, go the 1Kg springs and be done with it before bolting it all back together. Do the rear at the same time? Or see how she behaves first?


Looks like it could be a couple more weeks, exceeeeeeedingly busy this week and next.

I can drop ém out tomorrow night, I feel a road trip to the suspension gurus next week?

May as well get it right, ready for Xmas track day Way things are going it will take that long

[Phil]

Come on Damo, where are the pics FFS

[Damon Z1000]

In the week maaaate, in the week.

Just put the farker back together, gotta get the front guard from work, painted it.

Clutch springs in thanks to MK for getting me the right price and a fresh oil change.

Pics mmmmmm Monday or Tuesday.

Just from sitting I can feel the front is heaps firmer but we still think the springs need upping in the front to 1kg and the rear spring cus I'm a fatty and the Zed aint light

See how she goes next Saturday, I may run the rear and front to Zenos and get him to change the springs and revalve for my weight, then again I may just sell the carnt as she is

Patience my learnéd friend patiece

[hoffy]

Pics fuck ya!

[Phil]

Considering the front end wasnt at its best it was still pretty bloody good at Marulan yesterday, only issue was the bump on the brakes into T1

[MadKaw]

Hmm, well after a little bit of research it would appear that 04/05 zx10r springs are the same length as the zx6r ones..
It also appears that stock 04/05 zx10r springs are 1.0kg...
Perfect for a Z1000 conversion.. according to the racetech spring selection chart..

I also know someone who has some...

The rear shock may be tweakable with some preload so we can try that before changing the spring... (I also found a heavier shock spring in my collection but it may be a bit short for the std shock - its for an ohlins.. )

[Damon Z1000]

Looks like a busy Saturday morning then doesnt it

[Chitchats]

Nice mate, would love to see photos of finished product, i will also endevour to post photos of my front end it has ZX6R shocks and twin braided (bought it like that, and now after being part of this forum understand the expense and the luck i had with my Zed ) .

Cheers,

[Damon Z1000]

Your not wrong, not that cheap.
Guess what just went for a run around the block and 'hard'on the brakes to pull up, hmmmm stop! got back to the garage and looks like they bottom out pretty easy.
Soooooo, they can come out again next week and get the MadKaw heavier springs front and rear

All up the whole process has knocked me back about $600 plus time and farking around but now the springs have to go in, more time and having to figure out how to strip forks

Here's some pics I took on the quicky tonight........

[Damon Z1000]

Pics......

Very Red

IMG_0356.JPG (137.52 KiB) Viewed 1789 times

IMG_0374.JPG (118.55 KiB) Viewed 1789 times

IMG_0373.JPG (123.32 KiB) Viewed 1789 times

IMG_0359.JPG (122.28 KiB) Viewed 1789 times

[Blurr]

Belly pan and I would be in

[Phil]

Looks good Damo, wonder if my forks are showa or KYB I'll have a look now........

I was quite happy with how my front end felt on Sunday. It was a little soft but only bottomed at that bump into T1. Rest of the time it was good and the brakes were better than me

I still havent added the 10mm of oil to the forks either - should be able to take some of the preload I've dialed in out when I do

[Six Addict]

hot damo!!!