REAR AXLE SET UP ZRX 1100 (99)

clanga61 · Post by **clanga61** » Tue Sep 22, 2009 9:29 pm

HEY, apparently i am missing a washer on my rear axle (on the disc side) according to the manual.
I have had the rear wheel of numerous times and never seen this so called washer,can anyone please enlighten me and send me a pic of the rear wheel set up (disc side) of 99ZRX 1100. CHEERS Clanga

Phil · Post by **Phil** » Tue Sep 22, 2009 9:45 pm

clanga61 wrote:HEY, apparently i am missing a washer on my rear axle (on the disc side) according to the manual.
I have had the rear wheel of numerous times and never seen this so called washer,can anyone please enlighten me and send me a pic of the rear wheel set up (disc side) of 99ZRX 1100. CHEERS Clanga

Where does the washer go, I had my wheel off (03, 1200R) and only put it on last night - I dont have no washer

TopCat · Post by **TopCat** » Wed Sep 23, 2009 9:31 pm

<<<re-read your posting - you've got the manual >>>
Just looked at the manual, there is a washer shown : from the RHS outside -

retaining ring -> axle nut -> washer -> spacer -> wheel

send me you email addy and I'll send you chapter 9 of the manual

TC

Phil · Post by **Phil** » Thu Sep 24, 2009 7:46 am

Is the 11 different to the 12 Tony?

I couldnt see a washer in mine

JetPilot · Post by **JetPilot** » Thu Sep 24, 2009 1:19 pm

I had a look at me manual and there is a washer. Not sure if I have one on my bike though, must check when the new hoops go on for the Island trip.

Phil · Post by **Phil** » Fri Sep 25, 2009 1:11 pm

Had a look at the manual last night, washer is on the nut side of thge axle, I didnt take that out of the eccentric when I took the wheel off - thats whay I never saw it.

clanga61 · Post by **clanga61** » Fri Sep 25, 2009 3:32 pm

Well this one has got me totally FU yes its in the manual but the inner dimensions of the washer is way to big,it floates on the axle,and just doesnt make any sense to me,i dont see many ZEDs around here to compare so a pic would put me out of my misery,FFS H_E_L_P

Phil · Post by **Phil** » Fri Sep 25, 2009 3:41 pm

clanga61 wrote:Well this one has got me totally FU yes its in the manual but the inner dimensions of the washer is way to big,it floates on the axle,and just doesnt make any sense to me,i dont see many ZEDs around here to compare so a pic would put me out of my misery,FFS H_E_L_P

I think it goes on the Axle nut that then sits in the eccentric from memory.

I'll see if I have a spare moment to take mine off tonight, Clanga PM your phone number & I'll ring ya if I get it off at a reasonable hour.

Kawasaki Sportsbike Riders Club - Australia - Online Forum

REAR AXLE SET UP ZRX 1100 (99)

REAR AXLE SET UP ZRX 1100 (99)

Re: REAR AXLE SET UP ZRX 1100 (99)

Re: REAR AXLE SET UP ZRX 1100 (99)

Re: REAR AXLE SET UP ZRX 1100 (99)

Re: REAR AXLE SET UP ZRX 1100 (99)

Re: REAR AXLE SET UP ZRX 1100 (99)

Re: REAR AXLE SET UP ZRX 1100 (99)

Re: REAR AXLE SET UP ZRX 1100 (99)