Hey All,
have just picked up a project bike for rebuild , a nice little KR250A 1984 model. anyone have an spares laying around? I am chasing the usual spares like pistons, barrells, head gaskets, rings , the bike has been sitting for 12 years so I am rebuilding it to it's former glory.
Will post some pics later
DJ
KR250A Tandem
-
Gosling1
- Team Donut
- Posts: 13826
- Joined: Mon Jun 20, 2005 9:30 pm
- Bike: ZX2R
- State: New South Wales
- Location: Anarchy Road
- Contact:
Re: KR250A Tandem
Billiam !!! Price check in aisle 5 !!!!
".....shut the gate on this one Maxie......it's the ducks guts !!............."
-
the kid
- KSRC Addict
- Posts: 3948
- Joined: Thu May 12, 2005 5:10 pm
- Bike: Yamaha
- State: Victoria
- Location: Bendigo
Re: KR250A Tandem
HaHa , the tandems are not my cup of tea Gos , but try this Pommy site for info .
http://www.kr-1s.co.uk/forum/index.php
There is a bloke named Scotty on there who lives in Melb and has a fair few bits and bobs for em .
http://www.kr-1s.co.uk/forum/index.php
There is a bloke named Scotty on there who lives in Melb and has a fair few bits and bobs for em .
Ummmm let me see
-
Valheru70
- KSRC Member
- Posts: 209
- Joined: Sat Nov 24, 2007 9:10 pm
- Bike: ZX6R
- State: Western Australia
- Location: Perth
Re: KR250A Tandem
Thanks will have a look.
DJ
DJ
-
netbikes
- Warming up
- Posts: 95
- Joined: Tue Aug 05, 2008 10:07 pm
- Bike: ZXR750
- State: Queensland
- Location: Brisbane
- Contact:
Re: KR250A Tandem
Great bikes once you overcome the spinning bearings. The crank mains are punched directly into the cases and spin loose causing loss of compression, hard starting etc. There are a few guys about that can fix that. Serco in Brisbane have steel liners for the barrels, you supply new pistons and they set them up for you, you just need to use a one size larger main jet to off set the heat increase. You are then able to rebore for larger pistons, of course you can't buy over size KR pistons but the option is there to find something you can use in them.
I have a few plastic bits left and new indicators...
I have a few plastic bits left and new indicators...
cheers.....
chris at www.netbikes com au
It's too late when you're in the ground.
chris at www.netbikes com au
It's too late when you're in the ground.
-
Valheru70
- KSRC Member
- Posts: 209
- Joined: Sat Nov 24, 2007 9:10 pm
- Bike: ZX6R
- State: Western Australia
- Location: Perth
Re: KR250A Tandem
aparently the KMX125 +2 will fit , but good to know that about the barrells thanks.
DJ
DJ
-
IsleofNinja
- KSRC Contributor
- Posts: 1021
- Joined: Wed Nov 21, 2007 10:08 pm
- Bike: ZX10R
- State: Western Australia
- Location: That tiny black dot in the distance.......
Re: KR250A Tandem
Sure I saw a similar thread on PSB!?
That you 'RR'?
That you 'RR'?
Last edited by IsleofNinja on Sat Jul 25, 2009 12:54 pm, edited 1 time in total.
06 ZX10r , 95 ZX9r
97 GSF1200 project streetfighter
07 FXST
EXPERIENCE:ex_spear_ee_anse :noun: Knowledge or skill derived from actual participation or direct contact rather than mere study, interest or internet.
97 GSF1200 project streetfighter
07 FXST
EXPERIENCE:ex_spear_ee_anse :noun: Knowledge or skill derived from actual participation or direct contact rather than mere study, interest or internet.
-
Valheru70
- KSRC Member
- Posts: 209
- Joined: Sat Nov 24, 2007 9:10 pm
- Bike: ZX6R
- State: Western Australia
- Location: Perth
Re: KR250A Tandem
PSWHO??? 
, yea is the same.
, yea is the same.