Today I stripped the clutch on my L model ZXR750 track bike as it would slip almost as though it wasn't engaged at all. I found 2 problems...
1. The bearing in the outer plate that the push rod acts on was cocked and half way out. This was obviously holding the clutch partly disengaged all the time. I have no idea how this could have happened? I have never ridden this bike so I can only assume that a previous owner has installed it incorrectly, although I don't see how anybody could do it. Photos below
![Image](http://i1252.photobucket.com/albums/hh562/meeko68/EC8E64B7-CE5D-4028-98B2-0DE3DA540D87_zpskkmccjwy.jpg)
![Image](http://i1252.photobucket.com/albums/hh562/meeko68/924A7490-C11B-4F28-977E-C962A6551A55_zpsfngqrpxw.jpg)
2. The leaf or finger Spring is broken. Photo below
![Image](http://i1252.photobucket.com/albums/hh562/meeko68/4A278644-30C0-4578-8FF0-4C031BB34CE1_zpswmavs0j3.jpg)
The parts manuals show a different leaf Spring and nut (different part # and the Spring looks different) for the '94 and '95 model to the '93. Mine has the '93 type leaf Spring in it. The parts diagram also shows 2 leaf springs for the later models not 1 like the '93.
Can anybody explain the difference? Or do I just put the late model springs and but in mine? Every other part number in the clutch is identical in all models.
I'm guessing the later model Spring was an update to a better part?
Thanks
Brian