AIRBOX MOD 91-750

ZX2R, ZXR400, ZXR750, ZX6R, ZX7R, ZX9R & ZX12R & others.

AIRBOX MOD 91-750

Postby old zx750 » Fri Jan 22, 2016 1:50 am

I'm in the process of doing some mods to my 91-zx750, just pulled the tank and airbox/carbs what a design! can't remove air filter without carbs and air box , the cool air tubes run through the tank and cool air over airbox , air inlet horizontal at back of box so I plan to cut a couple of holes vertical above standard inlet.
pulled rear shock -stuffed and have a 09 zx9 I think, :D shock that should work i'll post pics -heaps more comp/rebound adj
weighed 03 gxr rear wheel 3kg lighter with a 190 tyre ,i'll check sprocket/ front wheel alignment tomorrow
going to weigh a 01gsxr front wheel also and disc/caliper fitment
replace the stock muffler with a straight through Yoshi ,any ideas on how much to jet up ?
zx750j,gsxr1100j,2x 90 gsxr 11/7 builds,gs1100gkd bore to 1200
triumph rigid build, gasser/hot rod build
User avatar
old zx750
Newbie
 
Posts: 37
Joined: Sun Nov 29, 2015 9:18 am
Location: murgon qld
Bike: ZXR750
State: Queensland

Re: AIRBOX MOD 91-750

Postby old zx750 » Fri Jan 22, 2016 9:29 pm

Shock is about 30mm shorter,canister would hit batt box, make a bracket 30mm longer retain rear height adjustability
10 adjustments on comp/rebound easily assessable

Image
Last edited by old zx750 on Fri Jan 22, 2016 9:48 pm, edited 1 time in total.
zx750j,gsxr1100j,2x 90 gsxr 11/7 builds,gs1100gkd bore to 1200
triumph rigid build, gasser/hot rod build
User avatar
old zx750
Newbie
 
Posts: 37
Joined: Sun Nov 29, 2015 9:18 am
Location: murgon qld
Bike: ZXR750
State: Queensland

Re: AIRBOX MOD 91-750

Postby old zx750 » Fri Jan 22, 2016 9:32 pm

03 v 91 wheel

Image
zx750j,gsxr1100j,2x 90 gsxr 11/7 builds,gs1100gkd bore to 1200
triumph rigid build, gasser/hot rod build
User avatar
old zx750
Newbie
 
Posts: 37
Joined: Sun Nov 29, 2015 9:18 am
Location: murgon qld
Bike: ZXR750
State: Queensland

Re: AIRBOX MOD 91-750

Postby old zx750 » Fri Jan 22, 2016 9:34 pm

raised srad gsxr handlebars -going under top triple clamp

Image
zx750j,gsxr1100j,2x 90 gsxr 11/7 builds,gs1100gkd bore to 1200
triumph rigid build, gasser/hot rod build
User avatar
old zx750
Newbie
 
Posts: 37
Joined: Sun Nov 29, 2015 9:18 am
Location: murgon qld
Bike: ZXR750
State: Queensland

Re: AIRBOX MOD 91-750

Postby old zx750 » Fri Jan 22, 2016 9:37 pm

01-03 front wheel

Image
zx750j,gsxr1100j,2x 90 gsxr 11/7 builds,gs1100gkd bore to 1200
triumph rigid build, gasser/hot rod build
User avatar
old zx750
Newbie
 
Posts: 37
Joined: Sun Nov 29, 2015 9:18 am
Location: murgon qld
Bike: ZXR750
State: Queensland

Re: AIRBOX MOD 91-750

Postby old zx750 » Fri Jan 22, 2016 9:39 pm

stock muffler v Yoshi alum

Image
zx750j,gsxr1100j,2x 90 gsxr 11/7 builds,gs1100gkd bore to 1200
triumph rigid build, gasser/hot rod build
User avatar
old zx750
Newbie
 
Posts: 37
Joined: Sun Nov 29, 2015 9:18 am
Location: murgon qld
Bike: ZXR750
State: Queensland

Re: AIRBOX MOD 91-750

Postby old zx750 » Fri Jan 22, 2016 9:42 pm

inlet showing horizontal inlet ,is there supposed to be a forward facing piece that goes on back of air box ?

Image
zx750j,gsxr1100j,2x 90 gsxr 11/7 builds,gs1100gkd bore to 1200
triumph rigid build, gasser/hot rod build
User avatar
old zx750
Newbie
 
Posts: 37
Joined: Sun Nov 29, 2015 9:18 am
Location: murgon qld
Bike: ZXR750
State: Queensland


Return to ZX-R Older Model Discussion

Who is online

Users browsing this forum: No registered users and 24 guests