QuickShifter Power Commander QEM vs Annitori

ZX6R, ZX10R, ZX14R, Ninja 1000 etc

Re: QuickShifter Power Commander QEM vs Annitori

Postby MadKaw » Mon Apr 15, 2013 10:45 am

Nelso wrote:So what's the best one to run on an '04 ZX10 with a Powercomander? I remember something about Madkaw having trouble with putting one on.

Someone at the track the other day said I would gain half a second by fitting one. Was he full of shit or are they that good to have?


I have a PK Power quickshifter on mine, its basically a copy of the dynojet one, but much cheaper. Never had a problem with it once set up, but I have done 2 gearboxes.. :oops: one due to an incorrect install though... (sealed oil galleries...)
You need the power commander to run it, but on the later models with 8 injectors you also need the expansion module... We found that out after fitting one to Blurrs 08, hence it went onto Watties 06.....
http://www.pk-power.com/quickshifter.ph ... n99tk3d397
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
MadKaw
Administrator
Administrator
 
Posts: 9666
Joined: Tue Apr 20, 2004 4:33 pm
Location: Windsor or the Creek..
Bike: ZX10R
State: New South Wales

Re: QuickShifter Power Commander QEM vs Annitori

Postby ducati_paul » Mon Apr 15, 2013 11:46 am

Nelso wrote:So what's the best one to run on an '04 ZX10 with a Powercomander? I remember something about Madkaw having trouble with putting one on.

Someone at the track the other day said I would gain half a second by fitting one. Was he full of shit or are they that good to have?


Next time we're at the track together take mine for a blast :kuda:
2012 Royal Enfield Military for the Road
User avatar
ducati_paul
KSRC Contributor
KSRC Contributor
 
Posts: 1713
Joined: Tue Aug 22, 2006 8:58 pm
Location: Sydney
Bike: ZX10R
State: New South Wales

Re: QuickShifter Power Commander QEM vs Annitori

Postby EDU » Mon Apr 15, 2013 12:27 pm

Wattie wrote:
Unless you are actually using the clutch now, there's no way you'd make up half a second.


Agree but it can get close to that... but not on a ZX10! You won't change gears often enough to add up to half a sec, I think. Smaller engines benefit more from quickshifters, I reckon.
Wattie wrote:
Trick with them is not to lean on it, you need to change gears sharply.


This!
User avatar
EDU
KSRC Regular
KSRC Regular
 
Posts: 526
Joined: Wed Nov 24, 2010 12:30 pm
Location: Bondi/Tamarama
Bike: ZX6R
State: New South Wales

Re: QuickShifter Power Commander QEM vs Annitori

Postby shannony » Thu Apr 18, 2013 2:44 pm

Hey Guys,
I started this whole thing :) Just getting back to you i Put the Annitori in and it is pretty awesome. Nice up in the high rev range a little clunky down low but that's what the clutch is for.
At the end of the day the amount of times you have the thing anywhere near full throttle on the road is like how often you see pigs flying :)

I have it on the default Medium setting and it works very well. Just got to adjust your riding style a little on the down shifts and your in business. Would definitely go that over the PC version which i tested also on another bike.

Thanks for all the support and help again Guys.
shannony
Warming up
Warming up
 
Posts: 63
Joined: Sat Jun 23, 2012 10:43 am
Bike: ZX10R
State: Victoria

Re: QuickShifter Power Commander QEM vs Annitori

Postby Juggy » Sat Apr 20, 2013 4:13 pm

What sort of revs are we talking about when it's clunky shannony?
This is my signature and it can say whatever I want.
Juggy
KSRC Member
KSRC Member
 
Posts: 149
Joined: Sun Oct 10, 2010 8:09 am
Location: Townsville
Bike: ZX10R
State: Queensland

Re: QuickShifter Power Commander QEM vs Annitori

Postby shannony » Tue Apr 23, 2013 9:43 am

Hey Juggy,

I mainly notice it between 1st and 2nd under 5-6K anything over 6k and you dont even feel the suspension twitching !
shannony
Warming up
Warming up
 
Posts: 63
Joined: Sat Jun 23, 2012 10:43 am
Bike: ZX10R
State: Victoria

Previous

Return to ZX-R / Ninja Current Model Discussion

Who is online

Users browsing this forum: No registered users and 28 guests